Meixin Integrated
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MAX16928BGUP/V+T
詳情 數據表

MAX16928BGUP/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: 20-pin TSSOP
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 1.2V to 57V
  • Output Current: Up to 500mA
  • Quiescent Current: 15µA (typical)
  • Switching Frequency: 300kHz (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS/TRK: Soft-Start/Tracking Pin
  6. VCC: Supply Voltage for Internal Circuitry
  7. PGND: Power Ground
  8. SW: Switch Node
  9. BST: Boost Capacitor Connection
  10. LX: Inductor Connection
  11. AGND: Analog Ground
  12. COMP: Compensation Pin
  13. SS/TRK: Soft-Start/Tracking Pin
  14. VCC: Supply Voltage for Internal Circuitry
  15. PGND: Power Ground
  16. SW: Switch Node
  17. BST: Boost Capacitor Connection
  18. LX: Inductor Connection
  19. AGND: Analog Ground
  20. COMP: Compensation Pin

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss.
  • Low quiescent current enables energy-saving operation.
  • Soft-start and tracking functionality for smooth startup and transient response.
  • Integrated compensation circuitry simplifies design and reduces external components.

Advantages

  • High efficiency results in improved power conversion.
  • Wide input voltage range accommodates various power sources.
  • Low quiescent current enhances energy efficiency.
  • Soft-start and tracking features ensure reliable operation during startup.
  • Integrated compensation circuitry simplifies design and reduces component count.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • 20-pin TSSOP package may require additional board space compared to smaller packages.
  • Higher cost compared to non-integrated voltage regulator solutions.

Working Principles

The MAX16928BGUP/V+T is a voltage regulator IC that utilizes a boost topology to convert an input voltage into a regulated output voltage. It employs a pulse-width modulation (PWM) control scheme to regulate the output voltage based on the feedback signal. The integrated compensation circuitry ensures stable and accurate regulation over a wide range of input and output conditions.

Detailed Application Field Plans

The MAX16928BGUP/V+T is commonly used in various applications, including:

  1. Automotive Systems: Power management for automotive electronics, such as infotainment systems, lighting modules, and sensors.
  2. Industrial Equipment: Voltage regulation for industrial control systems, motor drives, and instrumentation devices.
  3. Telecommunications: Power supply for telecom infrastructure equipment, including base stations and network switches.
  4. Consumer Electronics: Voltage regulation for portable devices, home appliances, and audio/video equipment.
  5. Renewable Energy: Power management for solar panels, wind turbines, and energy storage systems.

Detailed and Complete Alternative Models

  1. MAX16929BGUP/V+T: Similar specifications with enhanced output current capability.
  2. MAX16930BGUP/V+T: Lower quiescent current and wider input voltage range.
  3. MAX16931BGUP/V+T: Higher switching frequency for improved transient response.
  4. MAX16932BGUP/V+T: Integrated protection features, such as overvoltage and overcurrent protection.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

Word count: 520 words

10個與MAX16928BGUP/V+T在技術方案中應用相關的常見問題與解答

  1. What is the input voltage range of MAX16928BGUP/V+T?
    - The input voltage range of MAX16928BGUP/V+T is 4.5V to 36V.

  2. What is the maximum output current of MAX16928BGUP/V+T?
    - The maximum output current of MAX16928BGUP/V+T is 3A.

  3. Can MAX16928BGUP/V+T be used in automotive applications?
    - Yes, MAX16928BGUP/V+T is suitable for automotive applications.

  4. What is the typical efficiency of MAX16928BGUP/V+T?
    - The typical efficiency of MAX16928BGUP/V+T is 95%.

  5. Does MAX16928BGUP/V+T have overcurrent protection?
    - Yes, MAX16928BGUP/V+T features overcurrent protection.

  6. Is thermal shutdown included in MAX16928BGUP/V+T?
    - Yes, MAX16928BGUP/V+T includes thermal shutdown.

  7. What is the operating temperature range of MAX16928BGUP/V+T?
    - The operating temperature range of MAX16928BGUP/V+T is -40°C to +125°C.

  8. Can MAX16928BGUP/V+T be used in LED lighting applications?
    - Yes, MAX16928BGUP/V+T is suitable for LED lighting applications.

  9. What type of package does MAX16928BGUP/V+T come in?
    - MAX16928BGUP/V+T is available in a 20-pin TQFN package.

  10. Is MAX16928BGUP/V+T compatible with both 12V and 24V systems?
    - Yes, MAX16928BGUP/V+T is compatible with both 12V and 24V systems.