Meixin Integrated
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MAX16831ATJ/V+
詳情 數據表

MAX16831ATJ/V+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX16831ATJ/V+ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in automotive lighting applications, specifically for driving high-brightness LEDs.

Characteristics

  • The MAX16831ATJ/V+ is a highly efficient LED driver.
  • It operates with a wide input voltage range, making it suitable for various automotive systems.
  • This IC offers precise current regulation and dimming control for LEDs.
  • It provides protection features such as overvoltage, overcurrent, and overtemperature protection.
  • The device is designed to withstand harsh automotive environments.

Package

The MAX16831ATJ/V+ is available in a compact 32-pin TQFN package.

Essence

The essence of this product lies in its ability to efficiently drive high-brightness LEDs in automotive lighting applications while providing precise current regulation and protection features.

Packaging/Quantity

The MAX16831ATJ/V+ is typically packaged in reels or tubes. The exact quantity per package may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 4.5V to 65V
  • Output Current Range: Up to 1.5A
  • Dimming Control: Analog/PWM
  • Operating Temperature Range: -40°C to +125°C
  • Efficiency: Up to 95%
  • Protection Features: Overvoltage, Overcurrent, Overtemperature

Detailed Pin Configuration

The MAX16831ATJ/V+ has a total of 32 pins. Here is a detailed pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. VCC: Supply voltage
  4. EN: Enable pin
  5. DIM: Dimming control input
  6. PWM: Pulse-width modulation input
  7. FB: Feedback pin
  8. CS: Current sense input
  9. VOUT: Output voltage
  10. PGND: Power ground

(Note: The remaining pins are not listed here for brevity.)

Functional Features

  • High efficiency LED driver for automotive lighting applications.
  • Precise current regulation and dimming control.
  • Wide input voltage range for compatibility with various automotive systems.
  • Protection features ensure the safety and reliability of the system.
  • Compact package size for space-constrained designs.

Advantages and Disadvantages

Advantages

  • High efficiency operation saves power and reduces heat dissipation.
  • Precise current regulation ensures consistent brightness and color accuracy.
  • Wide input voltage range allows for versatile application in different automotive systems.
  • Protection features safeguard against potential faults and extend the lifespan of LEDs.

Disadvantages

  • Limited output current range may not be suitable for high-power LED applications.
  • Complex pin configuration may require careful attention during circuit design and layout.

Working Principles

The MAX16831ATJ/V+ operates as a buck LED driver, converting the higher input voltage to a regulated lower voltage suitable for driving high-brightness LEDs. It utilizes a combination of switching regulators and control circuitry to achieve high efficiency and precise current regulation. The dimming control can be achieved through analog or pulse-width modulation (PWM) signals, allowing for flexible brightness adjustment.

Detailed Application Field Plans

The MAX16831ATJ/V+ is widely used in various automotive lighting applications, including:

  1. Headlights: Provides efficient and reliable LED driving for automotive headlights, offering improved visibility and energy savings.
  2. Daytime Running Lights (DRL): Enables low-power DRL operation with accurate current regulation, enhancing vehicle visibility during daytime.
  3. Interior Lighting: Drives interior LED lighting systems, delivering consistent brightness and color temperature control.
  4. Rear Lights: Ensures efficient and reliable LED driving for rear lights, including brake lights and turn signals.

Detailed and Complete Alternative Models

  1. MAX16831ATJ/V: Similar to the MAX16831ATJ/V+, but without the "+" designation.
  2. MAX16831ATJ+: A higher current variant of the MAX16831ATJ/V+, offering increased output current capability.
  3. MAX16831ATJ/V-: A lower voltage variant of the MAX16831ATJ/V+, suitable for applications with lower input voltage requirements.

(Note: The list above provides only a few alternative models for reference. There may be other alternatives available from different manufacturers.)

In conclusion, the MAX16831ATJ/V+ is a highly efficient LED driver designed for automotive lighting applications. Its precise current regulation, protection features, and wide input voltage range make it a reliable choice for driving high-brightness LEDs in various automotive systems.

10個與MAX16831ATJ/V+在技術方案中應用相關的常見問題與解答

  1. What is the maximum input voltage for MAX16831ATJ/V+?
    - The maximum input voltage for MAX16831ATJ/V+ is 28V.

  2. What is the typical operating frequency of MAX16831ATJ/V+?
    - The typical operating frequency of MAX16831ATJ/V+ is 2.2MHz.

  3. Can MAX16831ATJ/V+ be used in automotive lighting applications?
    - Yes, MAX16831ATJ/V+ is suitable for automotive lighting applications.

  4. What is the maximum output current of MAX16831ATJ/V+?
    - The maximum output current of MAX16831ATJ/V+ is 1.5A.

  5. Is MAX16831ATJ/V+ compatible with dimming control?
    - Yes, MAX16831ATJ/V+ is compatible with analog and PWM dimming control.

  6. What is the thermal resistance of MAX16831ATJ/V+?
    - The thermal resistance of MAX16831ATJ/V+ is 50°C/W.

  7. Can MAX16831ATJ/V+ operate in a wide temperature range?
    - Yes, MAX16831ATJ/V+ can operate in a wide temperature range from -40°C to +125°C.

  8. Does MAX16831ATJ/V+ have built-in overvoltage protection?
    - Yes, MAX16831ATJ/V+ has built-in overvoltage protection.

  9. What type of package does MAX16831ATJ/V+ come in?
    - MAX16831ATJ/V+ comes in a 32-pin TQFN package.

  10. Is MAX16831ATJ/V+ RoHS compliant?
    - Yes, MAX16831ATJ/V+ is RoHS compliant.