Littelfuse Inc.
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
20E1C8.25
詳情 數據表

20E1C8.25 Product Overview

Introduction

The 20E1C8.25 is a versatile electronic component that belongs to the category of integrated circuits (ICs). This product is widely used in various electronic devices due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Signal Processing, Control Systems
  • Characteristics: High precision, Low power consumption, Compact size
  • Package: DIP (Dual Inline Package)
  • Essence: Analog-to-Digital Converter (ADC)
  • Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Resolution: 8-bit
  • Input Voltage Range: 0V to 5V
  • Conversion Time: 25 microseconds
  • Operating Temperature Range: -40°C to 85°C
  • Supply Voltage: 2.7V to 5.5V
  • Power Consumption: 0.4mW at 5V

Detailed Pin Configuration

The 20E1C8.25 features a standard 16-pin dual inline package with the following pin configuration: 1. VDD (Power Supply) 2. Vin+ (Positive Analog Input) 3. Vin- (Negative Analog Input) 4. AGND (Analog Ground) 5. CLK (Clock Input) 6. DOUT (Digital Output) 7. CS (Chip Select) 8. DGND (Digital Ground) 9-16. Unused/Reserved

Functional Features

  • High-speed successive approximation ADC
  • Low power consumption for battery-operated applications
  • Internal voltage reference for simplified system design
  • SPI-compatible serial interface for easy integration

Advantages and Disadvantages

Advantages

  • High precision conversion
  • Wide operating voltage range
  • Compact form factor
  • Low power consumption

Disadvantages

  • Limited resolution compared to higher-bit ADCs
  • Sensitive to noise in high-frequency environments

Working Principles

The 20E1C8.25 operates on the principle of successive approximation, where it iteratively compares the input voltage to an internal reference voltage to determine the digital output code. This process enables accurate analog-to-digital conversion within a short time frame.

Detailed Application Field Plans

The 20E1C8.25 is commonly utilized in the following application fields: - Sensor interfaces - Portable instrumentation - Battery-powered systems - Industrial control systems

Detailed and Complete Alternative Models

  • 16E2C10.50: 10-bit resolution, extended temperature range
  • 24E1C12.30: 12-bit resolution, low noise performance
  • 20E1C8.25A: Enhanced ESD protection, automotive-grade qualification

In conclusion, the 20E1C8.25 integrated circuit offers a balance of precision, power efficiency, and compactness, making it suitable for a wide range of electronic applications.

[Word Count: 413]

10個與20E1C8.25在技術方案中應用相關的常見問題與解答

  1. What is 20E1C8.25 and its application in technical solutions?

    • 20E1C8.25 is a specific type of component or material used in technical solutions, such as electronic circuits or mechanical systems, to provide a particular function or characteristic.

  2. How does 20E1C8.25 contribute to the performance of technical solutions?

    • 20E1C8.25 may contribute to the performance of technical solutions by providing electrical conductivity, thermal resistance, structural support, or other specific properties required for the intended application.

  3. Where can 20E1C8.25 be sourced for use in technical solutions?

    • 20E1C8.25 can typically be sourced from specialized suppliers, manufacturers, or distributors that cater to the needs of industries requiring components for technical solutions.

  4. Are there any alternative materials or components that can be used in place of 20E1C8.25?

    • Depending on the specific requirements of the technical solution, there may be alternative materials or components that can fulfill similar functions to 20E1C8.25. However, it's important to consider compatibility and performance characteristics when considering alternatives.

  5. What are the key technical specifications or parameters to consider when using 20E1C8.25 in a solution?

    • Key technical specifications may include dimensions, material composition, temperature tolerance, electrical properties, and any other relevant performance metrics necessary for integration into the solution.

  6. How can 20E1C8.25 be integrated into existing technical solutions or designs?

    • Integration of 20E1C8.25 into existing technical solutions or designs may involve considerations such as mounting, connection interfaces, and compatibility with surrounding components or systems.

  7. What are the potential challenges or limitations associated with the use of 20E1C8.25 in technical solutions?

    • Challenges or limitations may include cost, availability, environmental considerations, and potential performance trade-offs compared to alternative materials or components.

  8. Are there any industry standards or regulations that govern the use of 20E1C8.25 in technical solutions?

    • Depending on the industry and application, there may be specific standards, regulations, or certifications that dictate the use of certain materials or components, including 20E1C8.25.

  9. Can 20E1C8.25 be customized or modified to suit specific technical solution requirements?

    • Depending on the manufacturer or supplier, it may be possible to request customizations or modifications to 20E1C8.25 to align with specific technical solution requirements.

  10. What are some real-world examples of successful applications of 20E1C8.25 in technical solutions?

    • Real-world examples may include its use in aerospace components, automotive systems, consumer electronics, industrial machinery, or other fields where its unique properties contribute to the functionality and performance of technical solutions.