IXYS
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
IXFP130N10T
詳情 數據表

IXFP130N10T

Introduction

The IXFP130N10T is a power MOSFET belonging to the category of semiconductor devices. This device is commonly used in various electronic applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Power MOSFET
  • Use: The IXFP130N10T is used as a switching device in power electronics applications, such as motor control, power supplies, and inverters.
  • Characteristics: It exhibits low on-state resistance, high current capability, and fast switching speed.
  • Package: The IXFP130N10T is typically available in a TO-220 package, which provides thermal efficiency and ease of mounting.
  • Essence: Its essence lies in providing efficient power switching and control in electronic circuits.
  • Packaging/Quantity: It is commonly available in reels or tubes containing multiple units.

Specifications

  • Voltage Rating: 100V
  • Current Rating: 130A
  • On-State Resistance: 10mΩ
  • Gate Threshold Voltage: 2V
  • Operating Temperature Range: -55°C to 175°C
  • Package Type: TO-220

Detailed Pin Configuration

The IXFP130N10T typically has three pins: 1. Gate (G): Used to control the switching of the MOSFET by applying the appropriate voltage. 2. Drain (D): Connected to the load in the circuit and carries the main current during operation. 3. Source (S): Connected to the ground or return path for the current flow.

Functional Features

  • Low On-State Resistance: Enables efficient power transfer with minimal loss.
  • High Current Capability: Suitable for high-power applications.
  • Fast Switching Speed: Allows for rapid switching between on and off states, reducing switching losses.

Advantages and Disadvantages

Advantages

  • High current handling capability
  • Low on-state resistance
  • Fast switching speed
  • Reliable performance in power electronics applications

Disadvantages

  • Higher gate drive requirements compared to some other MOSFETs
  • Sensitive to static electricity and voltage spikes

Working Principles

The IXFP130N10T operates based on the principle of field-effect transistors. When a sufficient voltage is applied to the gate terminal, it creates an electric field that allows current to flow between the drain and source terminals. By controlling the gate voltage, the MOSFET can be switched on and off, regulating the flow of current through the circuit.

Detailed Application Field Plans

The IXFP130N10T finds extensive use in various applications, including: - Motor Control: Controlling the speed and direction of motors in industrial and automotive systems. - Power Supplies: Regulating and converting electrical power in DC-DC converters and AC-DC inverters. - Inverters: Converting DC power to AC power in renewable energy systems and motor drives.

Detailed and Complete Alternative Models

Some alternative models to the IXFP130N10T include: - IRFP250N: Similar power MOSFET with a higher voltage rating. - FDPF18N50: MOSFET with comparable characteristics suitable for power applications. - STP80NF55-06: Alternative MOSFET offering similar performance in power electronics.

In conclusion, the IXFP130N10T power MOSFET offers high current handling, low on-state resistance, and fast switching speed, making it a versatile component in power electronics applications.

[Word Count: 515]

10個與IXFP130N10T在技術方案中應用相關的常見問題與解答

  1. What is the maximum drain-source voltage of IXFP130N10T?

    • The maximum drain-source voltage of IXFP130N10T is 100V.

  2. What is the continuous drain current rating of IXFP130N10T?

    • The continuous drain current rating of IXFP130N10T is 130A.

  3. What is the on-state resistance (RDS(on)) of IXFP130N10T?

    • The on-state resistance (RDS(on)) of IXFP130N10T is typically 4.5mΩ at VGS = 10V.

  4. What is the gate threshold voltage of IXFP130N10T?

    • The gate threshold voltage of IXFP130N10T is typically 2.0V.

  5. What is the maximum junction temperature of IXFP130N10T?

    • The maximum junction temperature of IXFP130N10T is 175°C.

  6. What are the recommended operating conditions for IXFP130N10T?

    • The recommended operating conditions for IXFP130N10T include a maximum drain-source voltage of 100V, a continuous drain current of 130A, and a junction temperature not exceeding 175°C.

  7. What are the typical applications for IXFP130N10T?

    • IXFP130N10T is commonly used in high-current switching applications such as motor control, power supplies, and inverters.

  8. What are the key features of IXFP130N10T?

    • The key features of IXFP130N10T include low RDS(on), high current capability, and a rugged and reliable design.

  9. What are the thermal characteristics of IXFP130N10T?

    • The thermal characteristics of IXFP130N10T include a low thermal resistance and the ability to dissipate heat effectively.

  10. What are the recommended mounting techniques for IXFP130N10T?

    • It is recommended to use proper heatsinking and thermal management techniques when mounting IXFP130N10T to ensure efficient heat dissipation and reliable operation.