圖片可能僅供參考。
有關產品詳細信息,請參閱規格。
IXFK44N80Q3

IXFK44N80Q3

Product Overview

  • Category: Power MOSFET
  • Use: Power switching applications
  • Characteristics: High voltage, high current capability, low on-resistance
  • Package: TO-264
  • Essence: Efficient power management
  • Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Voltage Rating: 800V
  • Current Rating: 44A
  • On-Resistance: 0.085 ohms
  • Gate Charge: 60nC
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

The IXFK44N80Q3 features a standard TO-264 pin configuration with three pins: gate, drain, and source.

Functional Features

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge
  • Avalanche energy specified

Advantages

  • Suitable for high-power applications
  • Low conduction losses
  • Enhanced efficiency
  • Robust and reliable

Disadvantages

  • Higher cost compared to lower voltage MOSFETs
  • Requires careful handling due to high voltage rating

Working Principles

The IXFK44N80Q3 operates based on the principles of field-effect transistors, utilizing its high voltage and low on-resistance to efficiently control power flow in various applications.

Detailed Application Field Plans

This MOSFET is ideal for use in high-power applications such as industrial motor drives, power supplies, renewable energy systems, and electric vehicle powertrains.

Detailed and Complete Alternative Models

  • IXFN44N80Q3
  • IRFP4568PBF
  • STW44NM50FD

Note: The above alternative models have similar specifications and can be considered as substitutes for the IXFK44N80Q3.


This comprehensive entry provides an in-depth understanding of the IXFK44N80Q3 Power MOSFET, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

10個與IXFK44N80Q3在技術方案中應用相關的常見問題與解答

  1. What is IXFK44N80Q3?

    • IXFK44N80Q3 is a high power MOSFET designed for various technical applications requiring high current and voltage handling capabilities.
  2. What is the maximum voltage rating of IXFK44N80Q3?

    • The maximum voltage rating of IXFK44N80Q3 is 800V.
  3. What is the maximum current rating of IXFK44N80Q3?

    • The maximum current rating of IXFK44N80Q3 is 44A.
  4. What are the typical applications of IXFK44N80Q3?

    • Typical applications of IXFK44N80Q3 include power supplies, motor control, inverters, and other high-power switching applications.
  5. What is the on-state resistance (RDS(on)) of IXFK44N80Q3?

    • The on-state resistance of IXFK44N80Q3 is typically low, making it suitable for high-efficiency power conversion.
  6. Does IXFK44N80Q3 require a heat sink for operation?

    • Depending on the application and power dissipation, a heat sink may be required to ensure proper thermal management.
  7. Is IXFK44N80Q3 suitable for automotive applications?

    • Yes, IXFK44N80Q3 is suitable for automotive applications such as electric vehicle power systems and battery management.
  8. What are the key features of IXFK44N80Q3?

    • Key features of IXFK44N80Q3 include low on-state resistance, high current and voltage ratings, and rugged construction for reliability.
  9. Can IXFK44N80Q3 be used in parallel to increase current handling capability?

    • Yes, IXFK44N80Q3 can be used in parallel to increase current handling capability in high-power applications.
  10. Are there any recommended driver circuits for IXFK44N80Q3?

    • It is recommended to use gate driver circuits that can provide sufficient drive voltage and current to fully turn on and off IXFK44N80Q3 for optimal performance.