Intersil
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
ISL83483IBZ
詳情 數據表

ISL83483IBZ

Product Overview

Category

ISL83483IBZ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal transmission and communication purposes.

Characteristics

  • High-speed data transmission capability
  • Low power consumption
  • Wide operating voltage range
  • Robust protection features against electrical noise and interference

Package

ISL83483IBZ is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL83483IBZ lies in its ability to facilitate reliable and efficient signal transmission in various electronic applications.

Packaging/Quantity

ISL83483IBZ is typically packaged in reels containing a specific quantity, such as 250 or 1000 units per reel.

Specifications

  • Supply Voltage Range: 3.0V to 5.5V
  • Data Rate: Up to 20 Mbps
  • Number of Channels: 1
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Logic Levels: CMOS/TTL

Detailed Pin Configuration

ISL83483IBZ consists of the following pins:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. RO: Receiver output
  4. RE: Receiver enable
  5. DE: Driver enable
  6. DI: Driver input
  7. VCC: Power supply input
  8. GND: Ground reference

Functional Features

  • Bi-directional data transmission
  • Built-in protection against bus contention and excessive current
  • Enhanced ESD protection
  • Low quiescent current consumption
  • High noise immunity

Advantages and Disadvantages

Advantages

  • High-speed data transmission capability enables efficient communication.
  • Wide operating voltage range allows compatibility with various systems.
  • Robust protection features ensure reliable operation in noisy environments.
  • Low power consumption contributes to energy efficiency.

Disadvantages

  • Limited number of channels (1) may restrict certain applications requiring multiple channels.

Working Principles

ISL83483IBZ operates based on the principles of differential signaling. It utilizes a balanced transmission line to transmit data, where the voltage difference between two lines represents the digital information. This method provides noise immunity and allows for high-speed data transfer.

Detailed Application Field Plans

ISL83483IBZ finds applications in various fields, including but not limited to: - Industrial automation - Telecommunications - Automotive electronics - Medical devices - Consumer electronics

In industrial automation, it can be used for communication between sensors, actuators, and control systems. In telecommunications, it enables reliable data transmission between network equipment. In automotive electronics, it facilitates communication between different vehicle systems. In medical devices, it ensures secure and accurate data exchange. In consumer electronics, it enables efficient communication between devices.

Detailed and Complete Alternative Models

Some alternative models to ISL83483IBZ that offer similar functionality include: - SN65HVD10 - MAX485 - LTC2850 - ADM2483

These models provide comparable features and can be considered as alternatives depending on specific requirements and preferences.

Word count: 409

10個與ISL83483IBZ在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of ISL83483IBZ in technical solutions:

  1. Q: What is ISL83483IBZ? A: ISL83483IBZ is a high-speed, quad-channel RS-485/RS-422 transceiver IC.

  2. Q: What is the operating voltage range of ISL83483IBZ? A: The operating voltage range of ISL83483IBZ is typically between 3V and 5.5V.

  3. Q: Can ISL83483IBZ be used for both RS-485 and RS-422 communication? A: Yes, ISL83483IBZ can be used for both RS-485 and RS-422 communication protocols.

  4. Q: What is the maximum data rate supported by ISL83483IBZ? A: ISL83483IBZ supports a maximum data rate of up to 20 Mbps.

  5. Q: Does ISL83483IBZ have built-in ESD protection? A: Yes, ISL83483IBZ has built-in ±15kV ESD protection on the RS-485/RS-422 bus pins.

  6. Q: Can ISL83483IBZ operate in half-duplex mode? A: Yes, ISL83483IBZ can operate in both half-duplex and full-duplex modes.

  7. Q: What is the typical supply current consumption of ISL83483IBZ? A: The typical supply current consumption of ISL83483IBZ is around 500µA.

  8. Q: Does ISL83483IBZ support hot-swapping of devices? A: Yes, ISL83483IBZ supports hot-swapping, allowing devices to be connected or disconnected while the bus is active.

  9. Q: Can ISL83483IBZ be used in industrial environments? A: Yes, ISL83483IBZ is designed to operate reliably in harsh industrial environments with extended temperature ranges.

  10. Q: What package options are available for ISL83483IBZ? A: ISL83483IBZ is available in a 16-lead SOIC package and a 16-lead QSOP package.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.