Intel FPGAs/Altera
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
EN2342QI
詳情 數據表

EN2342QI

Product Overview

Category: Power Management IC
Use: Voltage Regulator
Characteristics: High efficiency, compact size
Package: QFN-32
Essence: Integrated synchronous buck regulator
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.6V to 5.5V
  • Output Current: Up to 4A
  • Efficiency: Up to 95%
  • Switching Frequency: 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The EN2342QI features a QFN-32 package with the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. PGND: Power ground
  4. SW: Switch node connection
  5. FB: Feedback voltage input
  6. SS/TR: Soft-start/tracking control
  7. EN: Enable control
  8. VCC: Supply voltage for internal circuitry
  9. AGND: Analog ground
  10. COMP: Compensation network connection
  11. BOOT: Bootstrap capacitor connection
  12. LX: Inductor connection
  13. BST: Boost capacitor connection
  14. VOUT: Output voltage

Functional Features

  • Integrated high-efficiency synchronous buck regulator
  • Wide input voltage range for versatile applications
  • Adjustable output voltage for flexibility
  • Compact size for space-constrained designs
  • Low dropout voltage for improved efficiency
  • Overcurrent and overtemperature protection
  • Soft-start and tracking control for smooth operation

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for integration in small devices - Wide input voltage range enables compatibility with various power sources - Overcurrent and overtemperature protection ensures device safety - Soft-start and tracking control enhance operational stability

Disadvantages: - Limited output current may not be suitable for high-power applications - Higher cost compared to non-integrated voltage regulators - Requires careful thermal management due to compact size

Working Principles

The EN2342QI is a synchronous buck regulator that converts a higher input voltage to a lower output voltage efficiently. It utilizes pulse-width modulation (PWM) to regulate the output voltage by adjusting the duty cycle of the switching transistor. The integrated control circuitry ensures stable and accurate voltage regulation, while the synchronous rectification minimizes power losses.

Detailed Application Field Plans

The EN2342QI is well-suited for a wide range of applications, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial automation equipment - Telecommunications infrastructure - Automotive electronics - IoT devices

Detailed and Complete Alternative Models

  1. EN2343QI: Similar specifications and features, but with higher output current capability.
  2. EN2341QI: Similar specifications and features, but with lower output current capability.
  3. EN2344QI: Similar specifications and features, but with wider input voltage range.

These alternative models provide options based on specific requirements and can be considered as alternatives to the EN2342QI.

Word count: 345 words

10個與EN2342QI在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of EN2342QI in technical solutions:

  1. Q: What is EN2342QI? A: EN2342QI is a specific technical solution that provides efficient power management capabilities for electronic devices.

  2. Q: How does EN2342QI benefit technical solutions? A: EN2342QI offers high power conversion efficiency, compact size, and advanced features like voltage regulation and protection, making it ideal for various technical applications.

  3. Q: What types of devices can EN2342QI be used in? A: EN2342QI can be used in a wide range of devices, including smartphones, tablets, laptops, IoT devices, and other portable electronics.

  4. Q: Does EN2342QI support multiple input voltages? A: Yes, EN2342QI supports a wide range of input voltages, allowing it to be used with different power sources.

  5. Q: Can EN2342QI handle high current loads? A: Yes, EN2342QI is designed to handle high current loads, making it suitable for power-hungry devices or applications.

  6. Q: Is EN2342QI compatible with different battery chemistries? A: Yes, EN2342QI is compatible with various battery chemistries, such as lithium-ion, lithium-polymer, and nickel-metal hydride.

  7. Q: Does EN2342QI have built-in protection features? A: Yes, EN2342QI incorporates protection features like overvoltage protection, overcurrent protection, and thermal shutdown to ensure safe operation.

  8. Q: Can EN2342QI be easily integrated into existing designs? A: Yes, EN2342QI is designed for easy integration and can be implemented into existing designs with minimal modifications.

  9. Q: What is the efficiency rating of EN2342QI? A: EN2342QI typically has high power conversion efficiency, often exceeding 90%, which helps optimize power usage and prolong battery life.

  10. Q: Are there any application-specific considerations when using EN2342QI? A: Depending on the specific application, factors like input/output voltage requirements, load characteristics, and thermal management may need to be considered during the design process.

Please note that the specific details and answers may vary depending on the actual specifications and documentation provided by the manufacturer of EN2342QI.