Intel FPGAs/Altera
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
10M16DCF256C8G
詳情 數據表

10M16DCF256C8G

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Memory storage
  • Characteristics: High capacity, fast access speed, low power consumption
  • Package: DCFBGA (Dual Chip Fine-pitch Ball Grid Array)
  • Essence: Non-volatile memory device
  • Packaging/Quantity: Individually packaged, quantity varies based on manufacturer

Specifications

  • Capacity: 10 Megabits (1.25 Megabytes)
  • Organization: 16 Megabits x 1 bit
  • Interface: Parallel
  • Voltage Supply: 2.7V - 3.6V
  • Access Time: 70 ns
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 10M16DCF256C8G IC has a total of 256 pins. The pin configuration is as follows:

  • Pins 1-8: Address Inputs (A0-A7)
  • Pins 9-16: Address Inputs (A8-A15)
  • Pins 17-24: Address Inputs (A16-A23)
  • Pins 25-32: Address Inputs (A24-A31)
  • Pins 33-40: Data Inputs/Outputs (DQ0-DQ7)
  • Pins 41-48: Data Inputs/Outputs (DQ8-DQ15)
  • Pins 49-56: Data Inputs/Outputs (DQ16-DQ23)
  • Pins 57-64: Data Inputs/Outputs (DQ24-DQ31)
  • Pins 65-72: Chip Enable (CE#)
  • Pins 73-80: Output Enable (OE#)
  • Pins 81-88: Write Enable (WE#)
  • Pins 89-96: Ready/Busy (RB#)
  • Pins 97-104: Chip Select (CS#)
  • Pins 105-112: Address Latch Enable (ALE)
  • Pins 113-120: Write Protect (WP#)
  • Pins 121-128: Reset (RESET#)
  • Pins 129-136: Clock (CLK)
  • Pins 137-144: Not Connected (NC)
  • Pins 145-152: Ground (GND)
  • Pins 153-160: Ground (GND)
  • Pins 161-168: Power Supply (VCC)
  • Pins 169-176: Power Supply (VCC)
  • Pins 177-184: Not Connected (NC)
  • Pins 185-192: Not Connected (NC)
  • Pins 193-200: Not Connected (NC)
  • Pins 201-208: Not Connected (NC)
  • Pins 209-216: Not Connected (NC)
  • Pins 217-224: Not Connected (NC)
  • Pins 225-232: Not Connected (NC)
  • Pins 233-240: Not Connected (NC)
  • Pins 241-248: Not Connected (NC)
  • Pins 249-256: Not Connected (NC)

Functional Features

  • Non-volatile memory: Retains data even when power is disconnected
  • High capacity: Stores up to 10 Megabits of data
  • Fast access speed: Allows for quick retrieval and storage of information
  • Low power consumption: Operates efficiently, conserving energy

Advantages and Disadvantages

Advantages: - Large storage capacity - Fast access speed - Low power consumption - Non-volatile memory

Disadvantages: - Limited interface options (only parallel) - Relatively slower access time compared to some other memory devices

Working Principles

The 10M16DCF256C8G IC is based on Flash memory technology. It utilizes a combination of floating-gate transistors and charge storage to retain data even when power is disconnected. The memory cells are organized in a parallel configuration, allowing for simultaneous read and write operations. The IC communicates with the external system through its address, data, and control pins.

Detailed Application Field Plans

The 10M16DCF256C8G IC finds applications in various fields, including: - Computer systems - Consumer electronics - Automotive industry - Industrial automation - Telecommunications

In computer systems, it can be used for storing BIOS (Basic Input/Output System) or firmware code. In consumer electronics, it can be utilized for data storage in devices like digital cameras, MP3 players, and set-top boxes. In the automotive industry, it can be employed for storing vehicle parameters, calibration data, or multimedia content. In industrial automation, it can be used for program storage in PLCs (Programmable Logic Controllers). In telecommunications, it can be utilized for storing configuration data in networking equipment.

Detailed and Complete Alternative Models

Some alternative models to the 10M16DCF256C8G IC include: - 10M08

10個與10M16DCF256C8G在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of 10M16DCF256C8G in technical solutions:

  1. Q: What is the 10M16DCF256C8G? A: The 10M16DCF256C8G is a specific model of Field-Programmable Gate Array (FPGA) manufactured by a company called Xilinx.

  2. Q: What are the key features of the 10M16DCF256C8G? A: Some key features of this FPGA include 10,000 logic cells, 16,000 flip-flops, 256KB of block RAM, and support for various I/O standards.

  3. Q: What are the typical applications of the 10M16DCF256C8G? A: This FPGA can be used in a wide range of applications such as industrial automation, automotive electronics, telecommunications, and high-performance computing.

  4. Q: How can I program the 10M16DCF256C8G? A: You can program this FPGA using Xilinx's Vivado Design Suite, which provides a graphical interface and a hardware description language (HDL) like Verilog or VHDL.

  5. Q: Can I reprogram the 10M16DCF256C8G after it has been deployed in a system? A: Yes, FPGAs are known for their reprogrammability, allowing you to update the functionality of the device even after it has been integrated into a system.

  6. Q: What kind of power supply does the 10M16DCF256C8G require? A: This FPGA typically requires a single power supply voltage of around 1.2V to 3.3V, depending on the specific design requirements.

  7. Q: Does the 10M16DCF256C8G support any communication protocols? A: Yes, this FPGA supports various communication protocols such as UART, SPI, I2C, Ethernet, and PCIe, making it suitable for interfacing with other devices.

  8. Q: Can I use the 10M16DCF256C8G in a safety-critical application? A: Yes, Xilinx FPGAs like the 10M16DCF256C8G offer features like built-in error detection and correction mechanisms, making them suitable for safety-critical applications.

  9. Q: Are there any development boards available for the 10M16DCF256C8G? A: Yes, Xilinx provides development boards specifically designed for this FPGA, which include all the necessary components for prototyping and testing.

  10. Q: Where can I find technical documentation and support for the 10M16DCF256C8G? A: You can find technical documentation, datasheets, application notes, and support resources on Xilinx's official website or by contacting their customer support team.

Please note that the specific details and answers may vary depending on the manufacturer's specifications and updates.