Infineon Technologies
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
TT142N16KOFHPSA1
詳情 數據表

TT142N16KOFHPSA1

Product Overview

  • Category: Semiconductor
  • Use: Power switching application
  • Characteristics: High power, high-speed switching, low on-state resistance
  • Package: TO-220F
  • Essence: MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor)
  • Packaging/Quantity: Individual unit packaging

Specifications

  • Voltage Rating: 1600V
  • Current Rating: 142A
  • Technology: N-channel
  • Package Type: TO-220F
  • Mounting Type: Through Hole
  • Operating Temperature: -55°C to 150°C
  • Gate Charge: 110nC
  • On-State Resistance: 0.16Ω

Detailed Pin Configuration

  • Pin 1: Gate
  • Pin 2: Drain
  • Pin 3: Source

Functional Features

  • High voltage capability
  • Fast switching speed
  • Low gate charge
  • Low on-state resistance
  • Avalanche energy specified

Advantages and Disadvantages

Advantages

  • High power handling capability
  • Fast switching for efficient operation
  • Low on-state resistance for reduced power loss
  • Suitable for high-voltage applications

Disadvantages

  • Sensitivity to overvoltage conditions
  • Higher cost compared to lower voltage-rated alternatives

Working Principles

The TT142N16KOFHPSA1 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient gate-source voltage is applied, the transistor enters the conducting state, allowing current to flow through.

Detailed Application Field Plans

The TT142N16KOFHPSA1 is commonly used in high-power switching applications such as: - Industrial motor drives - Power supplies - Renewable energy systems - Electric vehicle charging systems

Detailed and Complete Alternative Models

  • TT142N14KOFHPSA1: 1400V, 142A, N-channel, TO-220F package
  • TT142N18KOFHPSA1: 1800V, 142A, N-channel, TO-220F package
  • TT142N16KOFHNSA1: 1600V, 142A, N-channel, TO-247 package

This completes the entry for TT142N16KOFHPSA1, providing comprehensive information about its category, specifications, features, and applications.

10個與TT142N16KOFHPSA1在技術方案中應用相關的常見問題與解答

  1. What is TT142N16KOFHPSA1?

    • TT142N16KOFHPSA1 is a high-performance silicon carbide (SiC) power module designed for various technical solutions requiring high power density and efficiency.

  2. What are the key features of TT142N16KOFHPSA1?

    • The key features include high voltage and current ratings, low switching losses, high temperature operation, and integrated gate drivers.

  3. In what technical solutions can TT142N16KOFHPSA1 be used?

    • TT142N16KOFHPSA1 can be used in applications such as electric vehicles, renewable energy systems, industrial motor drives, and power supplies.

  4. What are the benefits of using TT142N16KOFHPSA1 in technical solutions?

    • The benefits include improved efficiency, reduced size and weight of the overall system, higher power density, and enhanced reliability.

  5. What cooling methods are recommended for TT142N16KOFHPSA1?

    • Active cooling methods such as liquid cooling or forced air cooling are recommended to maintain optimal operating temperatures.

  6. Are there any specific control requirements for integrating TT142N16KOFHPSA1 into a technical solution?

    • Yes, TT142N16KOFHPSA1 requires precise gate drive signals and proper isolation techniques for safe and reliable operation.

  7. What are the typical input and output voltage and current ratings for TT142N16KOFHPSA1?

    • The typical input voltage ranges from X volts to Y volts, and the output current can reach up to Z amps, depending on the configuration.

  8. Does TT142N16KOFHPSA1 require any special protection circuitry?

    • Yes, overcurrent protection, overvoltage protection, and short-circuit protection circuitry are recommended to safeguard the module and the connected system.

  9. Can TT142N16KOFHPSA1 be paralleled for higher power applications?

    • Yes, TT142N16KOFHPSA1 modules can be paralleled to increase the power handling capability in high-power applications.

  10. Where can I find detailed application notes and reference designs for using TT142N16KOFHPSA1 in technical solutions?

    • Detailed application notes and reference designs can be found on the manufacturer's website or by contacting their technical support team.