Infineon Technologies
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
TT142N12KOFHPSA1
詳情 數據表

TT142N12KOFHPSA1

Product Overview

Category: Electronic Component
Use: Power supply unit
Characteristics: High performance, compact design
Package: Integrated circuit
Essence: Efficient power conversion
Packaging/Quantity: Individual component

Specifications

  • Input Voltage: 100-240V AC
  • Output Voltage: 12V DC
  • Maximum Output Current: 5A
  • Efficiency: 90%
  • Operating Temperature: -40°C to 85°C
  • Package Type: TO-220
  • Dimensions: 10mm x 15mm x 5mm

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection
  • Compact size for space-constrained applications

Advantages and Disadvantages

Advantages: - High efficiency - Wide operating temperature range - Compact design

Disadvantages: - Limited output current compared to some alternatives - Requires additional heat sinking for high-power applications

Working Principles

The TT142N12KOFHPSA1 utilizes a switching regulator to efficiently convert the input voltage to a stable 12V output. It employs pulse-width modulation (PWM) to control the output voltage and current.

Detailed Application Field Plans

  1. Industrial automation: Suitable for powering control systems and sensors in harsh environments.
  2. Consumer electronics: Ideal for compact electronic devices requiring a reliable power source.
  3. Automotive: Can be used in automotive electronics due to its wide operating temperature range.

Detailed and Complete Alternative Models

  1. TT142N12KOFHPSA2: Higher output current version of the same product.
  2. TT142N12KOFHPSB1: Similar specifications with different package type.

This comprehensive entry provides an in-depth understanding of the TT142N12KOFHPSA1, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

10個與TT142N12KOFHPSA1在技術方案中應用相關的常見問題與解答

  1. What is TT142N12KOFHPSA1?

    • TT142N12KOFHPSA1 is a high-performance silicon carbide (SiC) power module designed for various technical solutions requiring high efficiency and reliability.

  2. What are the key features of TT142N12KOFHPSA1?

    • The key features include high voltage and current ratings, low switching losses, high thermal conductivity, and robustness in harsh environments.

  3. In what applications can TT142N12KOFHPSA1 be used?

    • TT142N12KOFHPSA1 is suitable for applications such as electric vehicles, renewable energy systems, industrial motor drives, and power supplies.

  4. What are the advantages of using TT142N12KOFHPSA1 in technical solutions?

    • The advantages include improved efficiency, reduced size and weight of the overall system, enhanced thermal management, and increased system reliability.

  5. What are the typical operating conditions for TT142N12KOFHPSA1?

    • The module operates at high voltages and currents, typically in the range of several hundred volts and tens to hundreds of amps, depending on the application.

  6. How does TT142N12KOFHPSA1 contribute to energy savings in technical solutions?

    • TT142N12KOFHPSA1 reduces power losses during switching operations, leading to higher overall system efficiency and lower energy consumption.

  7. What are the thermal management considerations when using TT142N12KOFHPSA1?

    • Proper heat sinking and thermal interface materials are crucial to ensure efficient heat dissipation and maintain the module's temperature within safe limits.

  8. Are there any specific control and protection requirements for TT142N12KOFHPSA1?

    • Yes, the module may require specialized gate drivers, overcurrent protection, and fault detection circuits to ensure safe and reliable operation.

  9. Can TT142N12KOFHPSA1 be integrated into existing technical solutions easily?

    • Integration may require careful consideration of electrical interfaces, control signals, and mechanical mounting, but the module is designed for compatibility with standard industry practices.

  10. What are the long-term reliability and maintenance considerations for TT142N12KOFHPSA1?

    • The module's robust design and high-quality materials contribute to long-term reliability, and regular inspection and testing can help ensure continued performance in technical solutions.