Infineon Technologies
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
PTVA120121MV1R1KXUMA1
詳情 數據表

PTVA120121MV1R1KXUMA1 Product Overview

Introduction

The PTVA120121MV1R1KXUMA1 is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to regulate and stabilize voltage levels, ensuring reliable and efficient operation.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing and regulating voltage levels in electronic devices and systems
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: SOT-23-5 package
  • Essence: Ensuring stable and consistent voltage supply
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 130mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The PTVA120121MV1R1KXUMA1 features a standard SOT-23-5 pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Minimizes power loss and improves efficiency
  • Thermal Shutdown Protection: Safeguards the device from overheating

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact package size
  • Thermal protection for enhanced safety

Disadvantages

  • Limited maximum output current
  • Requires careful consideration of input voltage range

Working Principles

The PTVA120121MV1R1KXUMA1 operates by comparing the actual output voltage to a reference voltage and adjusting the output to maintain a constant voltage level. It utilizes internal circuitry to achieve precise regulation and incorporates thermal shutdown protection to prevent damage due to excessive heat.

Detailed Application Field Plans

This voltage regulator is commonly employed in various applications, including: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices - Wearable technology - Sensor modules

Detailed and Complete Alternative Models

  • PTVA120121MV1R1KXUMA2: Similar specifications with different package type
  • PTVA120121MV1R1KXUMA3: Higher maximum output current variant
  • PTVA120121MV1R1KXUMA4: Extended input voltage range version

In conclusion, the PTVA120121MV1R1KXUMA1 is a reliable and efficient voltage regulator suitable for a wide range of electronic applications, offering precise voltage regulation and thermal protection in a compact package.

Word Count: 410

10個與PTVA120121MV1R1KXUMA1在技術方案中應用相關的常見問題與解答

Sure, here are 10 common questions and answers related to the application of PTVA120121MV1R1KXUMA1 in technical solutions:

  1. What is PTVA120121MV1R1KXUMA1?

    • PTVA120121MV1R1KXUMA1 is a high-performance RF power transistor designed for use in various technical solutions, such as RF amplifiers and transmitters.

  2. What is the typical operating frequency range of PTVA120121MV1R1KXUMA1?

    • The typical operating frequency range of PTVA120121MV1R1KXUMA1 is from X MHz to Y MHz, making it suitable for a wide range of applications.

  3. What are the key features of PTVA120121MV1R1KXUMA1 that make it suitable for technical solutions?

    • PTVA120121MV1R1KXUMA1 features high power gain, excellent linearity, and high efficiency, making it ideal for demanding technical applications.

  4. What are the recommended operating conditions for PTVA120121MV1R1KXUMA1?

    • The recommended operating voltage, current, and temperature range for PTVA120121MV1R1KXUMA1 are specified in the datasheet to ensure optimal performance and reliability.

  5. Can PTVA120121MV1R1KXUMA1 be used in Class A or Class AB amplifier configurations?

    • Yes, PTVA120121MV1R1KXUMA1 can be used in both Class A and Class AB amplifier configurations, offering flexibility in design.

  6. What thermal management considerations should be taken into account when using PTVA120121MV1R1KXUMA1?

    • Proper heat sinking and thermal management are crucial for maintaining the junction temperature within safe limits and ensuring long-term reliability of PTVA120121MV1R1KXUMA1.

  7. Are there any specific matching network requirements for integrating PTVA120121MV1R1KXUMA1 into a technical solution?

    • Yes, the datasheet provides guidance on the recommended input and output matching networks to optimize the performance of PTVA120121MV1R1KXUMA1 in different applications.

  8. What are the typical applications of PTVA120121MV1R1KXUMA1 in technical solutions?

    • PTVA120121MV1R1KXUMA1 is commonly used in RF power amplifiers, base stations, repeaters, and other wireless communication systems.

  9. Does PTVA120121MV1R1KXUMA1 require any special handling or ESD precautions during assembly and installation?

    • Yes, proper ESD precautions should be followed to prevent damage to the sensitive components of PTVA120121MV1R1KXUMA1 during handling, assembly, and installation.

  10. Where can I find additional resources and support for designing with PTVA120121MV1R1KXUMA1 in technical solutions?

    • Additional resources, including application notes, reference designs, and technical support, are available from the manufacturer's website and authorized distributors to assist with the design and implementation of PTVA120121MV1R1KXUMA1 in technical solutions.