IPP90N06S4L04AKSA1
Product Overview
- Category: Power MOSFET
- Use: Switching and amplification in power electronics applications
- Characteristics: High voltage, low on-resistance, high current capability
- Package: TO-220AB
- Essence: Efficient power management
- Packaging/Quantity: Bulk packaging, quantities vary
Specifications
- Voltage Rating: 60V
- Current Rating: 90A
- On-Resistance: 8.5mΩ
- Gate Threshold Voltage: 2V
- Package Type: TO-220AB
Detailed Pin Configuration
- Pin 1: Gate
- Pin 2: Drain
- Pin 3: Source
Functional Features
- High voltage capability
- Low on-resistance
- Fast switching speed
- Low gate threshold voltage
Advantages
- Suitable for high-power applications
- Low conduction losses
- Enhanced efficiency in power management systems
Disadvantages
- Higher cost compared to standard MOSFETs
- Larger physical size due to high current handling capability
Working Principles
The IPP90N06S4L04AKSA1 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to pass through, enabling efficient power switching and amplification.
Detailed Application Field Plans
- Switched-Mode Power Supplies: Utilized for high-efficiency power conversion
- Motor Control: Enables precise control of high-power electric motors
- Audio Amplifiers: Provides high-current amplification for audio systems
- LED Lighting: Facilitates efficient power management in LED driver circuits
Detailed and Complete Alternative Models
- IRF1405: Similar voltage and current ratings
- STP80NF70: Comparable characteristics and package type
- IXFH90N30: Alternative with enhanced switching speed and lower gate threshold voltage
This comprehensive entry provides an in-depth understanding of the IPP90N06S4L04AKSA1 Power MOSFET, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.
[Word Count: 298]
10個與IPP90N06S4L04AKSA1在技術方案中應用相關的常見問題與解答
What is IPP90N06S4L04AKSA1?
- IPP90N06S4L04AKSA1 is a power MOSFET transistor designed for high efficiency and low on-resistance in applications such as motor control, power supplies, and DC-DC converters.
What is the maximum drain-source voltage of IPP90N06S4L04AKSA1?
- The maximum drain-source voltage of IPP90N06S4L04AKSA1 is 60V.
What is the typical on-resistance of IPP90N06S4L04AKSA1?
- The typical on-resistance of IPP90N06S4L04AKSA1 is 9.5mΩ.
What are the typical applications of IPP90N06S4L04AKSA1?
- IPP90N06S4L04AKSA1 is commonly used in applications such as motor control, power supplies, DC-DC converters, and battery management systems.
What is the maximum continuous drain current of IPP90N06S4L04AKSA1?
- The maximum continuous drain current of IPP90N06S4L04AKSA1 is 90A.
What is the gate-source voltage range for IPP90N06S4L04AKSA1?
- The gate-source voltage range for IPP90N06S4L04AKSA1 is typically ±20V.
Does IPP90N06S4L04AKSA1 require a heatsink?
- Yes, IPP90N06S4L04AKSA1 may require a heatsink to dissipate heat effectively, especially when operating at high currents or in high ambient temperatures.
Is IPP90N06S4L04AKSA1 suitable for automotive applications?
- Yes, IPP90N06S4L04AKSA1 is suitable for automotive applications due to its high current handling capability and robust design.
What is the operating temperature range of IPP90N06S4L04AKSA1?
- The operating temperature range of IPP90N06S4L04AKSA1 is typically -55°C to 175°C.
Can IPP90N06S4L04AKSA1 be used in parallel to increase current handling capacity?
- Yes, IPP90N06S4L04AKSA1 can be used in parallel to increase current handling capacity in high-power applications. However, proper attention should be given to current sharing and thermal management.