Infineon Technologies
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
IDD04SG60CXTMA1
詳情 數據表

IDD04SG60CXTMA1

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High efficiency, compact design, low power consumption
  • Package: 16-pin SOIC
  • Essence: Regulates and manages power supply
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Current: 4A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 125°C
  • Efficiency: Up to 95%

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. SW (Switch Node)
  4. FB (Feedback)
  5. EN (Enable)
  6. COMP (Compensation)
  7. SS/TRK (Soft Start/Tracking)
  8. PGND (Power Ground)
  9. VCC (Internal Bias Voltage)
  10. BOOT (Bootstrap)
  11. PH (Phase)
  12. RT/CLK (Timing Resistor/Clock)
  13. SS/TRK (Soft Start/Tracking)
  14. ILIM (Current Limit)
  15. VOUT (Output Voltage)
  16. PGND (Power Ground)

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency for reduced power loss
  • Adjustable soft start for controlled power-up sequencing
  • Overcurrent protection for enhanced safety
  • Thermal shutdown for temperature management

Advantages

  • Compact size for space-constrained designs
  • High efficiency leads to energy savings
  • Wide input voltage range allows for flexibility in usage
  • Comprehensive protection features ensure reliability

Disadvantages

  • Higher cost compared to non-regulated power solutions
  • Requires careful PCB layout for optimal performance

Working Principles

The IDD04SG60CXTMA1 is a buck converter integrated circuit that regulates the input voltage to provide a stable output voltage. It utilizes pulse-width modulation (PWM) to control the switching of the internal MOSFET, adjusting the duty cycle to maintain the desired output voltage.

Detailed Application Field Plans

  • Automotive: Power management in vehicle electronics
  • Industrial: Control systems, motor drives, and instrumentation
  • Telecommunications: Base stations, networking equipment
  • Renewable Energy: Solar inverters, battery charging systems

Detailed and Complete Alternative Models

  1. IDD05SG50CXTMA1
    • Similar specifications with a different package
  2. IDD03SG70CXTMA1
    • Lower input voltage range but higher output current
  3. IDD04SG60CXTMB1
    • Enhanced thermal performance variant

This comprehensive entry provides detailed information about the IDD04SG60CXTMA1, covering its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

10個與IDD04SG60CXTMA1在技術方案中應用相關的常見問題與解答

  1. What is IDD04SG60CXTMA1?

    • IDD04SG60CXTMA1 is a specific model of semiconductor diode, commonly used in power supply and rectification applications.

  2. What are the key specifications of IDD04SG60CXTMA1?

    • The IDD04SG60CXTMA1 typically has a forward current rating of 4A, a reverse voltage rating of 600V, and a low forward voltage drop.

  3. In what technical solutions can IDD04SG60CXTMA1 be used?

    • IDD04SG60CXTMA1 can be used in various technical solutions such as power supplies, inverters, motor drives, and rectifier circuits.

  4. What are the advantages of using IDD04SG60CXTMA1 in technical solutions?

    • IDD04SG60CXTMA1 offers low forward voltage drop, high current capability, and fast switching characteristics, making it suitable for high-efficiency power conversion applications.

  5. Are there any specific thermal considerations when using IDD04SG60CXTMA1?

    • Yes, proper heat sinking and thermal management should be considered to ensure the IDD04SG60CXTMA1 operates within its specified temperature limits for reliable performance.

  6. Can IDD04SG60CXTMA1 be used in high-frequency applications?

    • Yes, IDD04SG60CXTMA1 is designed for high-speed switching and can be used in high-frequency applications such as switch-mode power supplies.

  7. What are the typical application circuits for IDD04SG60CXTMA1?

    • Typical application circuits include bridge rectifiers, buck/boost converters, and motor drive circuits where efficient power conversion is required.

  8. Does IDD04SG60CXTMA1 require any special protection circuitry?

    • It is recommended to include appropriate overcurrent and overvoltage protection circuitry to safeguard the IDD04SG60CXTMA1 and the overall system from potential faults.

  9. Can IDD04SG60CXTMA1 be paralleled for higher current applications?

    • Yes, multiple IDD04SG60CXTMA1 diodes can be paralleled to increase the current handling capability in high-power applications.

  10. Where can I find detailed application notes and reference designs for IDD04SG60CXTMA1?

    • Detailed application notes and reference designs for IDD04SG60CXTMA1 can often be found in the manufacturer's datasheets, application guides, or technical support resources.