Infineon Technologies
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
BTS50161EKBXUMA1
詳情 數據表

BTS50161EKBXUMA1

Product Overview

  • Category: Electronic Component
  • Use: Power Switch
  • Characteristics: High current handling capability, low on-resistance, overtemperature protection
  • Package: TO-263-7 (D2PAK)
  • Essence: MOSFET power switch
  • Packaging/Quantity: 1 piece per package

Specifications

  • Maximum Continuous Drain Current: 60A
  • Drain-Source Voltage: 30V
  • On-Resistance: 3.5mΩ
  • Input Voltage Range: 4.5V - 5.5V
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The BTS50161EKBXUMA1 has the following pin configuration:

  1. GND (Ground)
  2. IN (Input)
  3. EN (Enable)
  4. Vbb (Bootstrap Supply Voltage)
  5. OUT (Output)
  6. VS (Source Voltage)
  7. PGND (Power Ground)

Functional Features

  • High current handling capability allows for efficient power switching.
  • Low on-resistance minimizes power losses and heat generation.
  • Overtemperature protection ensures safe operation under high temperature conditions.

Advantages and Disadvantages

Advantages: - High current handling capability enables use in demanding applications. - Low on-resistance results in reduced power losses. - Overtemperature protection enhances reliability and safety.

Disadvantages: - Limited voltage range (up to 30V). - Requires an external bootstrap supply voltage (Vbb).

Working Principles

The BTS50161EKBXUMA1 is a MOSFET power switch that operates as a high-side switch. It controls the flow of current between the source and drain terminals based on the input signal. When the enable (EN) pin is activated, the switch turns on, allowing current to flow from the source to the drain. The low on-resistance of the MOSFET minimizes power losses during operation.

Detailed Application Field Plans

The BTS50161EKBXUMA1 is commonly used in various applications, including:

  1. Automotive: Power distribution systems, motor control, lighting control.
  2. Industrial: Power supplies, motor drives, robotics.
  3. Consumer Electronics: Battery management, DC-DC converters.

Detailed and Complete Alternative Models

  1. BTS50160EKBXUMA1

    • Similar specifications and features as BTS50161EKBXUMA1 but with a lower continuous drain current rating (40A).

  2. BTS50180EKBXUMA1

    • Higher continuous drain current rating (80A) compared to BTS50161EKBXUMA1.
    • Suitable for applications requiring higher current handling capability.

  3. BTS50150EKBXUMA1

    • Lower on-resistance (2.5mΩ) compared to BTS50161EKBXUMA1.
    • Ideal for applications where minimizing power losses is critical.

  4. BTS50170EKBXUMA1

    • Higher voltage range (up to 60V) compared to BTS50161EKBXUMA1.
    • Suitable for applications requiring higher voltage handling capability.

Note: These alternative models are just a few examples, and there are other options available in the market.

Word count: 346 words

10個與BTS50161EKBXUMA1在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of BTS50161EKBXUMA1 in technical solutions:

1. What is BTS50161EKBXUMA1? - BTS50161EKBXUMA1 is a specific model of power MOSFET transistor manufactured by Infineon Technologies. It is commonly used in various technical solutions for power management and control.

2. What is the voltage rating of BTS50161EKBXUMA1? - The voltage rating of BTS50161EKBXUMA1 is typically around 60 volts, making it suitable for applications that require high voltage handling capabilities.

3. What is the current rating of BTS50161EKBXUMA1? - The current rating of BTS50161EKBXUMA1 is typically around 100 amps, allowing it to handle high current loads efficiently.

4. What are some typical applications of BTS50161EKBXUMA1? - BTS50161EKBXUMA1 is commonly used in applications such as motor control, power supplies, battery management systems, and automotive electronics.

5. What is the package type of BTS50161EKBXUMA1? - BTS50161EKBXUMA1 comes in a TO-263-7 (D2PAK-7) package, which provides good thermal dissipation and ease of mounting.

6. What is the on-resistance of BTS50161EKBXUMA1? - The on-resistance of BTS50161EKBXUMA1 is typically very low, around 0.006 ohms, ensuring minimal power loss during operation.

7. Is BTS50161EKBXUMA1 suitable for high-frequency switching applications? - Yes, BTS50161EKBXUMA1 is designed to handle high-frequency switching applications with fast turn-on and turn-off characteristics.

8. Does BTS50161EKBXUMA1 have built-in protection features? - Yes, BTS50161EKBXUMA1 incorporates various protection features such as overcurrent protection, overtemperature protection, and short-circuit protection.

9. Can BTS50161EKBXUMA1 be used in automotive applications? - Yes, BTS50161EKBXUMA1 is specifically designed for automotive applications and meets the necessary standards and requirements.

10. Where can I find more information about BTS50161EKBXUMA1? - You can find more detailed information about BTS50161EKBXUMA1, including datasheets and application notes, on the official website of Infineon Technologies or by contacting their technical support team.