Infineon Technologies
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
BAW79DH6327XTSA1
詳情 數據表

BAW79DH6327XTSA1 Product Overview

Introduction

The BAW79DH6327XTSA1 is a semiconductor product belonging to the category of diodes. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Diode
  • Use: Rectification and signal demodulation
  • Characteristics: High-speed switching, low forward voltage drop
  • Package: SOT-23
  • Essence: Silicon diode
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Maximum Reverse Voltage: 70V
  • Forward Continuous Current: 200mA
  • Reverse Recovery Time: 4ns
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The BAW79DH6327XTSA1 has three pins: 1. Anode 2. Cathode 3. Not connected (NC)

Functional Features

  • High-speed switching for fast response applications
  • Low forward voltage drop for energy efficiency
  • Small form factor for space-constrained designs

Advantages and Disadvantages

Advantages

  • Fast switching speed
  • Low power dissipation
  • Compact package size

Disadvantages

  • Limited maximum reverse voltage
  • Relatively low forward current rating

Working Principles

The BAW79DH6327XTSA1 operates based on the principle of rectification, allowing current to flow in one direction while blocking it in the opposite direction. This enables its use in signal demodulation and various electronic circuits.

Detailed Application Field Plans

The BAW79DH6327XTSA1 finds applications in: - Switching power supplies - Signal demodulation circuits - High-frequency rectification circuits - Portable electronics

Detailed and Complete Alternative Models

  • 1N4148: A widely used general-purpose diode with similar characteristics
  • BAT54S: Dual series Schottky diode offering comparable performance
  • BAV99: Dual diode with high-speed switching capabilities

In conclusion, the BAW79DH6327XTSA1 diode offers high-speed switching and low forward voltage drop, making it suitable for various applications in electronics. While it has limitations in terms of maximum reverse voltage and forward current, it provides compact and efficient solutions for many circuit designs.

[Word Count: 330]

10個與BAW79DH6327XTSA1在技術方案中應用相關的常見問題與解答

  1. What is BAW79DH6327XTSA1?

    • BAW79DH6327XTSA1 is a dual high-speed switching diode with common cathode in a SOT363 package.

  2. What are the key features of BAW79DH6327XTSA1?

    • The key features include high switching speed, low capacitance, and low forward voltage.

  3. What are the typical applications of BAW79DH6327XTSA1?

    • Typical applications include high-speed switching, blocking, clamping, and detection in various technical solutions.

  4. What is the maximum forward voltage of BAW79DH6327XTSA1?

    • The maximum forward voltage is typically around 1V at a forward current of 100mA.

  5. What is the reverse recovery time of BAW79DH6327XTSA1?

    • The reverse recovery time is typically around 4ns.

  6. What is the maximum continuous forward current for BAW79DH6327XTSA1?

    • The maximum continuous forward current is typically around 250mA.

  7. How does BAW79DH6327XTSA1 perform in high-frequency applications?

    • BAW79DH6327XTSA1 performs well in high-frequency applications due to its low capacitance and high switching speed.

  8. Can BAW79DH6327XTSA1 be used in temperature-sensitive environments?

    • Yes, BAW79DH6327XTSA1 has a wide operating temperature range and can be used in temperature-sensitive environments.

  9. What are the storage conditions for BAW79DH6327XTSA1?

    • It should be stored in a dry and clean environment at a temperature range of -55°C to +150°C.

  10. Are there any recommended alternative components to BAW79DH6327XTSA1?

    • Some alternative components include 1N4148, BAT54S, and BAV99. However, it's important to consider specific application requirements when choosing alternatives.