9ZX21901BKLFT

Overview

• Category: Electronic Component
• Use: Integrated Circuit
• Characteristics: High-performance, low-power consumption
• Package: Surface Mount Technology (SMT)
• Essence: Microcontroller
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications and Parameters

• Operating Voltage: 3.3V
• Clock Frequency: 100 MHz
• Flash Memory: 512 KB
• RAM: 64 KB
• GPIO Pins: 32
• ADC Channels: 8
• UART Ports: 2
• I2C Interfaces: 1
• SPI Interfaces: 2

Pin Configuration

The pin configuration of 9ZX21901BKLFT is as follows:

| Pin Number | Name | Function | |------------|------|----------| | 1 | VDD | Power Supply | | 2 | GND | Ground | | 3 | RESET | Reset Signal | | 4 | GPIO1 | General Purpose Input/Output | | 5 | GPIO2 | General Purpose Input/Output | | 6 | UARTTX | UART Transmit | | 7 | UARTRX | UART Receive | | 8 | I2CSCL | I2C Serial Clock | | 9 | I2CSDA | I2C Serial Data | | 10 | SPIMISO | SPI Master In Slave Out | | 11 | SPIMOSI | SPI Master Out Slave In | | 12 | SPICLK | SPI Clock | | 13 | SPICS | SPI Chip Select | | 14 | ADC1 | Analog-to-Digital Converter Input 1 | | 15 | ADC2 | Analog-to-Digital Converter Input 2 | | 16 | ADC3 | Analog-to-Digital Converter Input 3 | | 17 | ADC4 | Analog-to-Digital Converter Input 4 | | 18 | ADC5 | Analog-to-Digital Converter Input 5 | | 19 | ADC6 | Analog-to-Digital Converter Input 6 | | 20 | ADC7 | Analog-to-Digital Converter Input 7 | | 21 | ADC8 | Analog-to-Digital Converter Input 8 |

Functional Characteristics

• High-performance microcontroller with low-power consumption
• Suitable for various applications requiring embedded control
• Supports multiple communication interfaces such as UART, I2C, and SPI
• Provides analog-to-digital conversion capability for sensor integration
• Flexible GPIO pins for general-purpose input/output operations
• Reset signal for system initialization and recovery

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Low-power consumption for energy-efficient designs - Versatile communication interfaces for easy integration - Ample flash memory and RAM for data storage and processing - Wide range of GPIO pins for flexible connectivity

Disadvantages: - Limited number of ADC channels - Relatively high cost compared to similar microcontrollers - Requires additional external components for certain applications

Applicable Range of Products

9ZX21901BKLFT is suitable for a wide range of products, including but not limited to: - Consumer electronics - Industrial automation systems - Internet of Things (IoT) devices - Automotive electronics - Medical equipment

Working Principles

The working principle of 9ZX21901BKLFT involves executing instructions stored in its flash memory to perform specific tasks. It utilizes the integrated peripherals and communication interfaces to interact with external devices and sensors. The microcontroller's GPIO pins allow for input and output operations, while the ADC channels enable analog signal conversion. The system can be initialized and reset using the dedicated reset signal.

Detailed Application Field Plans

1. Consumer Electronics: 9ZX21901BKLFT can be used in smart home devices, wearable technology, and multimedia systems.
2. Industrial Automation Systems: The microcontroller is suitable for controlling machinery, monitoring sensors, and managing data acquisition.
3. Internet of Things (IoT) Devices: It can be employed in IoT gateways, sensor nodes, and edge computing devices.
4. Automotive Electronics: 9ZX21901BKLFT can be utilized in vehicle control units, infotainment systems, and advanced driver-assistance systems (ADAS).
5. Medical Equipment: The microcontroller can be integrated into medical devices such as patient monitors, diagnostic equipment, and infusion pumps.

Detailed Alternative Models

1. 9ZX21902BKLFT: Similar to 9ZX21901BKLFT but with increased flash memory capacity.
2. 9ZX21903BKLFT: Similar to 9ZX21901BKLFT but with additional UART ports.
3. 9ZX21904BKLFT: Similar to