82V3202NLG
Overview
- Category: Integrated Circuit
- Use: Power Management
- Characteristics: High Efficiency, Low Power Consumption
- Package: QFN (Quad Flat No-leads)
- Essence: Voltage Regulator
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications and Parameters
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: 0.8V to 5.5V
- Maximum Output Current: 2A
- Quiescent Current: 60µA
- Switching Frequency: 1.2MHz
- Operating Temperature Range: -40°C to +85°C
Pin Configuration
The 82V3202NLG has a total of 16 pins arranged as follows:
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- SS (Soft Start)
- COMP (Compensation)
- PGND (Power Ground)
- SW (Switch)
- SW (Switch)
- SW (Switch)
- SW (Switch)
- VOUT (Output Voltage)
- VOUT (Output Voltage)
- VOUT (Output Voltage)
- VOUT (Output Voltage)
- VOUT (Output Voltage)
Functional Characteristics
- High Efficiency: The 82V3202NLG utilizes advanced power management techniques to achieve high efficiency levels, minimizing power loss.
- Low Power Consumption: With a quiescent current of only 60µA, the IC ensures minimal power consumption during standby or low-load conditions.
- Fast Load Transient Response: The voltage regulator responds quickly to changes in load, maintaining a stable output voltage even under dynamic conditions.
- Overcurrent Protection: The IC incorporates overcurrent protection to safeguard the circuit and connected devices from excessive current flow.
- Thermal Shutdown: In case of overheating, the IC automatically shuts down to prevent damage, ensuring reliable operation.
Advantages and Disadvantages
Advantages:
- High efficiency leads to reduced power consumption.
- Fast load transient response ensures stable output voltage.
- Overcurrent protection enhances circuit and device safety.
- Thermal shutdown prevents damage due to overheating.
Disadvantages:
- Limited input voltage range (4.5V to 28V).
- Maximum output current limited to 2A.
Applicable Range of Products
The 82V3202NLG is suitable for a wide range of applications, including but not limited to:
- Portable electronic devices
- Battery-powered systems
- Industrial automation equipment
- Automotive electronics
- LED lighting systems
Working Principles
The 82V3202NLG operates as a step-down voltage regulator, converting a higher input voltage to a lower output voltage. It utilizes a switching mechanism to efficiently regulate the output voltage while minimizing power loss. The IC employs feedback control to maintain a stable output voltage despite variations in input voltage and load conditions.
Detailed Application Field Plans
- Portable Electronic Devices: The 82V3202NLG can be used in smartphones, tablets, and wearable devices to provide efficient power management and extend battery life.
- Battery-Powered Systems: This IC is ideal for applications such as wireless sensors, IoT devices, and remote monitoring systems that rely on battery power.
- Industrial Automation Equipment: The voltage regulator can be employed in motor control systems, PLCs, and other industrial automation devices to ensure stable and reliable power supply.
- Automotive Electronics: With its compact size and high efficiency, the 82V3202NLG is suitable for various automotive applications, including infotainment systems, lighting control, and advanced driver-assistance systems (ADAS).
- LED Lighting Systems: The IC can be utilized in LED drivers to efficiently regulate the power supply for lighting applications, ensuring optimal performance and energy savings.
Detailed Alternative Models
- 82V3203NLG: Similar to the 82V3202NLG, but with a higher maximum output current of 3A.
- 82V3201NLG: Similar to the 82V3202NLG, but with a lower maximum output current of 1A.
- 82V3204NLG: Similar to the 82V3202NLG, but with additional features such as adjustable output voltage and synchronization capability.
5 Common Technical Questions and Answers
Q: What is the maximum input voltage supported by the 82V3202NLG?
A: The IC can handle input voltages ranging from 4.5V to 28V.
Q: Can the 82V3202NLG operate in high-temperature environments?
A: Yes, the IC has an operating temperature range of -40°C to +85