IDT, Integrated Device Technology Inc
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
82V2108BBG
詳情 數據表

Encyclopedia Entry: 82V2108BBG

Product Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High voltage, low power consumption
  • Package: BGA (Ball Grid Array)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 1.2V to 20V
  • Output Current: Up to 3A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Switching Frequency: 500kHz

Detailed Pin Configuration

The 82V2108BBG IC has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PGND: Power Ground
  7. SW: Switching Node
  8. COMP: Compensation Pin

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss.
  • Built-in protection features such as overvoltage and overcurrent protection.
  • Adjustable output voltage through external resistors.
  • Fast transient response for sudden load changes.

Advantages and Disadvantages

Advantages: - Wide input voltage range makes it suitable for various power supply designs. - High efficiency reduces energy waste and heat generation. - Compact BGA package enables space-saving on PCBs. - Built-in protection features enhance system reliability.

Disadvantages: - Requires external components for proper operation. - Limited output current compared to some other voltage regulators. - Higher cost compared to non-integrated solutions.

Working Principles

The 82V2108BBG is a voltage regulator IC that converts an input voltage within the range of 4.5V to 36V into a regulated output voltage between 1.2V and 20V. It utilizes a switching regulator topology to achieve high efficiency. The IC operates by rapidly switching an internal power transistor on and off, controlling the energy flow to maintain a stable output voltage. Feedback from the FB pin is used to adjust the duty cycle of the switching transistor, ensuring the desired output voltage is maintained.

Detailed Application Field Plans

The 82V2108BBG is commonly used in various applications where efficient power management is required. Some typical application fields include:

  1. Industrial Automation: Powering control systems, motor drives, and sensors.
  2. Automotive Electronics: Providing stable power supply for infotainment systems, lighting, and engine control units.
  3. Telecommunications: Regulating voltage for base stations, routers, and network equipment.
  4. Consumer Electronics: Powering portable devices, audio/video equipment, and gaming consoles.
  5. Renewable Energy: Managing power conversion in solar inverters and wind turbines.

Detailed and Complete Alternative Models

  • 82V2108BFG
  • 82V2108CBG
  • 82V2108DBG
  • 82V2108EBG

These alternative models offer similar functionality and specifications, providing flexibility in design choices while maintaining compatibility with existing systems.

Word Count: 342 words

10個與82V2108BBG在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of 82V2108BBG in technical solutions:

  1. Q: What is the 82V2108BBG? A: The 82V2108BBG is a specific integrated circuit (IC) that is commonly used in technical solutions.

  2. Q: What is the purpose of the 82V2108BBG? A: The 82V2108BBG is designed to perform specific functions within electronic devices or systems, such as signal processing or control.

  3. Q: What are the key features of the 82V2108BBG? A: Some key features of the 82V2108BBG may include high-speed operation, low power consumption, multiple input/output channels, and compatibility with various communication protocols.

  4. Q: In which applications can the 82V2108BBG be used? A: The 82V2108BBG can be used in a wide range of applications, including telecommunications, industrial automation, automotive electronics, and consumer electronics.

  5. Q: How does the 82V2108BBG contribute to system performance? A: The 82V2108BBG can enhance system performance by providing efficient and reliable signal processing, data conversion, or control capabilities.

  6. Q: Is the 82V2108BBG compatible with other ICs or components? A: Yes, the 82V2108BBG is designed to be compatible with other ICs and components commonly used in technical solutions, allowing for seamless integration.

  7. Q: What is the power supply requirement for the 82V2108BBG? A: The 82V2108BBG typically requires a specific voltage range for proper operation, which should be provided by the system's power supply.

  8. Q: Are there any specific design considerations when using the 82V2108BBG? A: Yes, it is important to consider factors such as thermal management, signal integrity, and proper grounding techniques when designing with the 82V2108BBG.

  9. Q: Can the 82V2108BBG be programmed or configured for specific applications? A: Depending on its capabilities, the 82V2108BBG may offer programmable features or configuration options that can be customized for specific applications.

  10. Q: Where can I find more information about the 82V2108BBG? A: You can refer to the datasheet, technical documentation, or the manufacturer's website for detailed information about the 82V2108BBG, including specifications, application notes, and reference designs.

Please note that the specific details and answers may vary depending on the actual specifications and documentation provided by the manufacturer of the 82V2108BBG.