SSCMLND160MG7A3
Product Overview
Category: Semiconductor
Use: Power management
Characteristics: High efficiency, low power consumption
Package: SMD
Essence: Voltage regulator
Packaging/Quantity: Tape and reel, 3000 units per reel
Specifications
- Input Voltage: 4.5V to 28V
- Output Voltage: 0.6V to 5.5V
- Output Current: 1.6A
- Dropout Voltage: 340mV at 1.6A
- Operating Temperature Range: -40°C to 125°C
- Package Type: 8-pin DFN (3x3mm)
Detailed Pin Configuration
- VIN (Input voltage)
- GND (Ground)
- EN (Enable)
- NC (No connection)
- FB (Feedback)
- NC (No connection)
- PG (Power good)
- VOUT (Output voltage)
Functional Features
- Wide input voltage range
- Low dropout voltage
- Overcurrent protection
- Thermal shutdown protection
- Power good indicator
Advantages
- High efficiency
- Small package size
- Wide operating temperature range
- Robust protection features
Disadvantages
- Limited output current compared to some alternatives
- Higher cost compared to linear regulators
Working Principles
The SSCMLND160MG7A3 is a voltage regulator that maintains a stable output voltage regardless of changes in the input voltage or load. It achieves this by using a feedback loop to adjust the internal switching elements, ensuring the desired output voltage is maintained.
Detailed Application Field Plans
The SSCMLND160MG7A3 is suitable for a wide range of applications including: - Battery-powered devices - Industrial automation - Automotive electronics - Telecommunications equipment - Portable consumer electronics
Detailed and Complete Alternative Models
- SSCMLND150MG7A2
- Similar specifications but with lower output current (1.5A)
- SSCMLND180MG7A4
- Higher output current (1.8A) with similar input and output voltage ranges
- SSCMLND130MG7A1
- Lower output current (1.3A) with similar characteristics and package type
In conclusion, the SSCMLND160MG7A3 is a versatile and efficient voltage regulator suitable for various applications, offering a balance of performance and features. Its wide input voltage range and robust protection mechanisms make it an ideal choice for demanding electronic systems.
(Word count: 331)
10個與SSCMLND160MG7A3在技術方案中應用相關的常見問題與解答
Sure, here are 10 common questions and answers related to the application of SSCMLND160MG7A3 in technical solutions:
What is the maximum operating temperature for SSCMLND160MG7A3?
- The maximum operating temperature for SSCMLND160MG7A3 is 125°C.
What is the typical capacitance value for SSCMLND160MG7A3?
- The typical capacitance value for SSCMLND160MG7A3 is 16uF.
What is the voltage rating for SSCMLND160MG7A3?
- The voltage rating for SSCMLND160MG7A3 is 450V.
Can SSCMLND160MG7A3 be used in high-frequency applications?
- Yes, SSCMLND160MG7A3 can be used in high-frequency applications due to its low equivalent series resistance (ESR).
Is SSCMLND160MG7A3 suitable for automotive electronics?
- Yes, SSCMLND160MG7A3 is suitable for automotive electronics as it meets the necessary reliability and performance requirements.
What is the expected lifespan of SSCMLND160MG7A3 in continuous operation?
- The expected lifespan of SSCMLND160MG7A3 in continuous operation is typically 2000 hours at the maximum operating temperature.
Does SSCMLND160MG7A3 have RoHS compliance?
- Yes, SSCMLND160MG7A3 is compliant with the Restriction of Hazardous Substances (RoHS) directive.
Can SSCMLND160MG7A3 be used in power supply filtering applications?
- Yes, SSCMLND160MG7A3 is suitable for power supply filtering due to its high capacitance and voltage rating.
What are the recommended storage conditions for SSCMLND160MG7A3?
- The recommended storage conditions for SSCMLND160MG7A3 are a temperature range of -55°C to 125°C and a relative humidity of 85% or less.
Is SSCMLND160MG7A3 suitable for use in industrial control systems?
- Yes, SSCMLND160MG7A3 is suitable for use in industrial control systems due to its reliability and performance characteristics.