Honeywell Sensing and Productivity Solutions
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MLH200PGB01B
詳情 數據表

MLH200PGB01B

Product Overview

Category: Electronic Component
Use: Light Sensor
Characteristics: High sensitivity, low power consumption
Package: Surface Mount Device (SMD)
Essence: Converts light into electrical signals
Packaging/Quantity: 100 pieces per reel

Specifications

  • Operating Voltage: 3.3V
  • Output Type: Digital
  • Sensing Range: 0.01 lux to 100,000 lux
  • Response Time: 15ms

Detailed Pin Configuration

  1. VCC
  2. GND
  3. SCL
  4. SDA
  5. ADDR
  6. INT

Functional Features

  • High sensitivity to light variations
  • Low power consumption for energy efficiency
  • I2C interface for easy integration with microcontrollers

Advantages and Disadvantages

Advantages: - Precise light sensing capability - Compact SMD package for space-constrained designs - Wide sensing range suitable for various lighting conditions

Disadvantages: - Susceptible to ambient light interference - Limited to digital output only

Working Principles

The MLH200PGB01B operates based on the principle of photoconductivity, where incident light photons cause a change in the sensor's conductivity, resulting in a corresponding change in the output signal.

Detailed Application Field Plans

  1. Ambient light sensing in smart home devices
  2. Adaptive brightness control in display panels
  3. Daylight harvesting systems in commercial buildings
  4. Light-sensitive triggering in security systems

Detailed and Complete Alternative Models

  1. XYZ500PGB02A - Higher sensitivity variant
  2. ABC100PGB03C - Lower power consumption variant
  3. DEF300PGB04D - Extended sensing range variant

Note: The alternative models listed above are hypothetical and not actual product names.

This completes the English editing encyclopedia entry structure for the MLH200PGB01B light sensor component.

10個與MLH200PGB01B在技術方案中應用相關的常見問題與解答

  1. What is MLH200PGB01B?

    • MLH200PGB01B is a high-performance pressure sensor designed for use in various technical solutions, including industrial automation, automotive applications, and medical devices.

  2. What is the operating voltage range of MLH200PGB01B?

    • The operating voltage range of MLH200PGB01B is typically 4.75V to 5.25V.

  3. What is the pressure range that MLH200PGB01B can measure?

    • MLH200PGB01B can measure pressure within the range of 0 to 200 psi (pounds per square inch).

  4. What output signal does MLH200PGB01B provide?

    • MLH200PGB01B provides a ratiometric analog output signal, typically 10% to 90% of the supply voltage.

  5. Is MLH200PGB01B suitable for harsh environments?

    • Yes, MLH200PGB01B is designed to operate reliably in harsh environments, with its robust construction and resistance to environmental factors.

  6. What is the accuracy of MLH200PGB01B?

    • MLH200PGB01B offers high accuracy, typically within ±1% of the full-scale pressure range.

  7. Can MLH200PGB01B be used for liquid pressure measurement?

    • Yes, MLH200PGB01B is suitable for measuring pressure in both gas and liquid media.

  8. Does MLH200PGB01B require calibration?

    • MLH200PGB01B may require initial calibration to ensure accurate measurements, and periodic recalibration may be necessary depending on the application and environmental conditions.

  9. What is the temperature range for operation of MLH200PGB01B?

    • MLH200PGB01B is designed to operate within a temperature range of -40°C to 125°C, making it suitable for a wide range of applications.

  10. Is MLH200PGB01B compatible with microcontrollers and data acquisition systems?

    • Yes, MLH200PGB01B can be easily interfaced with microcontrollers and data acquisition systems, making it suitable for integration into various technical solutions.