MLH100PGB01B
Product Overview
Category: Electronic Component
Use: Power Management
Characteristics: High efficiency, compact size
Package: SMD
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage: 4.5V to 28V
- Output Voltage: 0.8V to 5.5V
- Output Current: 10A
- Efficiency: Up to 95%
- Operating Temperature: -40°C to 125°C
- Package Type: BGA
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- VOUT (Output Voltage)
Functional Features
- Wide input voltage range
- High efficiency at light loads
- Adjustable output voltage
- Overcurrent and overtemperature protection
Advantages
- Compact size for space-constrained applications
- High efficiency for reduced power consumption
- Wide input voltage range for versatility
Disadvantages
- Higher cost compared to traditional linear regulators
- Requires careful PCB layout due to high switching frequency
Working Principles
The MLH100PGB01B is a synchronous buck voltage regulator that uses pulse-width modulation (PWM) to efficiently step down the input voltage to the desired output voltage. It utilizes a high-frequency switching architecture to achieve high efficiency across a wide load range.
Detailed Application Field Plans
The MLH100PGB01B is suitable for various applications requiring efficient power management, such as: - Industrial automation - Telecommunications equipment - Automotive electronics - Server and data storage systems
Detailed and Complete Alternative Models
MLH200PGB02C
- Higher output current capability
- Extended operating temperature range
- Different package type (QFN)
MLH50PGB03A
- Lower output current for lighter loads
- Reduced footprint for space-constrained designs
- Cost-effective alternative
In conclusion, the MLH100PGB01B offers high efficiency and compact size, making it ideal for diverse power management applications. While it has a higher cost and requires careful PCB layout, its functional features and wide application field plans make it a versatile choice in the electronic component market.
Word Count: 398
10個與MLH100PGB01B在技術方案中應用相關的常見問題與解答
What is MLH100PGB01B?
- MLH100PGB01B is a high-performance pressure sensor designed for use in various technical solutions, including industrial automation, automotive applications, and medical devices.
What are the key features of MLH100PGB01B?
- The key features of MLH100PGB01B include high accuracy, wide operating temperature range, small form factor, and compatibility with various media types.
How is MLH100PGB01B calibrated?
- MLH100PGB01B is factory calibrated, but it also supports on-site calibration using appropriate equipment and procedures.
What is the operating voltage range of MLH100PGB01B?
- MLH100PGB01B operates within a typical voltage range of 4.75V to 5.25V.
Can MLH100PGB01B be used in harsh environments?
- Yes, MLH100PGB01B is designed to withstand harsh environments and is suitable for use in demanding industrial and automotive applications.
What output signals does MLH100PGB01B provide?
- MLH100PGB01B provides analog output signals, typically in the form of ratiometric or non-ratiometric voltages.
Is MLH100PGB01B compatible with digital interfaces?
- MLH100PGB01B does not have built-in digital interfaces, but it can be interfaced with external ADCs or microcontrollers for digital signal processing.
What is the pressure range supported by MLH100PGB01B?
- MLH100PGB01B supports a wide pressure range, typically from 0 to 100 psi, making it suitable for a variety of pressure sensing applications.
Does MLH100PGB01B require temperature compensation?
- MLH100PGB01B incorporates temperature compensation to ensure accurate pressure measurements across a wide operating temperature range.
Are there any special considerations for integrating MLH100PGB01B into a technical solution?
- When integrating MLH100PGB01B, it's important to consider proper mounting, sealing, and electrical connections to ensure reliable and accurate performance in the intended application.