Exar Corporation
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
XR88C192CVTR-F
詳情 數據表

XR88C192CVTR-F

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller
  • Characteristics: High-performance, low-power consumption
  • Package: TQFP (Thin Quad Flat Package)
  • Essence: Advanced microcontroller with various features
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Architecture: 8-bit
  • CPU Speed: 16 MHz
  • Flash Memory: 192 KB
  • RAM: 8 KB
  • Operating Voltage: 2.7V to 5.5V
  • I/O Pins: 32
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 4
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • PWM Channels: 6
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XR88C192CVTR-F has a total of 44 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. GND - Ground
  3. P0.0 - General-purpose I/O pin
  4. P0.1 - General-purpose I/O pin
  5. P0.2 - General-purpose I/O pin
  6. P0.3 - General-purpose I/O pin
  7. P0.4 - General-purpose I/O pin
  8. P0.5 - General-purpose I/O pin
  9. P0.6 - General-purpose I/O pin
  10. P0.7 - General-purpose I/O pin
  11. P1.0 - General-purpose I/O pin
  12. P1.1 - General-purpose I/O pin
  13. P1.2 - General-purpose I/O pin
  14. P1.3 - General-purpose I/O pin
  15. P1.4 - General-purpose I/O pin
  16. P1.5 - General-purpose I/O pin
  17. P1.6 - General-purpose I/O pin
  18. P1.7 - General-purpose I/O pin
  19. P2.0 - General-purpose I/O pin
  20. P2.1 - General-purpose I/O pin
  21. P2.2 - General-purpose I/O pin
  22. P2.3 - General-purpose I/O pin
  23. P2.4 - General-purpose I/O pin
  24. P2.5 - General-purpose I/O pin
  25. P2.6 - General-purpose I/O pin
  26. P2.7 - General-purpose I/O pin
  27. P3.0 - General-purpose I/O pin
  28. P3.1 - General-purpose I/O pin
  29. P3.2 - General-purpose I/O pin
  30. P3.3 - General-purpose I/O pin
  31. P3.4 - General-purpose I/O pin
  32. P3.5 - General-purpose I/O pin
  33. P3.6 - General-purpose I/O pin
  34. P3.7 - General-purpose I/O pin
  35. RST - Reset pin
  36. XTAL1 - Crystal oscillator input
  37. XTAL2 - Crystal oscillator output
  38. AVDD - Analog power supply voltage
  39. AGND - Analog ground
  40. AIN0 - Analog input 0
  41. AIN1 - Analog input 1
  42. VREF - Reference voltage for ADC
  43. VBAT - Battery voltage input
  44. VDDIO - I/O power supply voltage

Functional Features

  • High-performance 8-bit microcontroller with a 16 MHz CPU speed
  • Large flash memory capacity of 192 KB for program storage
  • Ample RAM of 8 KB for data storage and manipulation
  • Multiple communication interfaces (UART, SPI, I2C) for easy integration with other devices
  • Timers/Counters for precise timing and event counting
  • 10-bit ADC with 8 channels for analog signal acquisition
  • PWM channels for generating precise analog output signals
  • Low-power consumption for energy-efficient applications
  • Wide operating voltage range for flexibility in power supply options

Advantages and Disadvantages

Advantages: - High-performance microcontroller suitable for demanding applications - Ample memory and I/O capabilities for versatile usage - Multiple communication interfaces for easy connectivity - Low-power consumption for energy-efficient designs - Wide operating voltage range for flexibility

Disadvantages: - Limited number of I/O pins compared to some other microcontrollers - Higher cost compared to lower-end microcontrollers with similar specifications

Working Principles

The XR88C192CVTR-F is based on an 8-bit architecture and operates at a clock speed of 16 MHz. It executes instructions stored

10個與XR88C192CVTR-F在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of XR88C192CVTR-F in technical solutions:

  1. Question: What is XR88C192CVTR-F?
    Answer: XR88C192CVTR-F is a specific model of integrated circuit (IC) designed for use in technical solutions.

  2. Question: What is the purpose of XR88C192CVTR-F?
    Answer: XR88C192CVTR-F is typically used as a microcontroller or processor in various electronic devices and systems.

  3. Question: What are the key features of XR88C192CVTR-F?
    Answer: Some key features of XR88C192CVTR-F include high processing power, low power consumption, multiple I/O interfaces, and built-in peripherals.

  4. Question: In which applications can XR88C192CVTR-F be used?
    Answer: XR88C192CVTR-F can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and IoT devices.

  5. Question: What programming language is used to program XR88C192CVTR-F?
    Answer: XR88C192CVTR-F can be programmed using various languages like C, C++, or assembly language depending on the development environment and requirements.

  6. Question: Can XR88C192CVTR-F support real-time operating systems (RTOS)?
    Answer: Yes, XR88C192CVTR-F is capable of running real-time operating systems, making it suitable for time-critical applications.

  7. Question: How can I interface external devices with XR88C192CVTR-F?
    Answer: XR88C192CVTR-F provides multiple I/O interfaces such as UART, SPI, I2C, GPIO, and ADC, allowing easy integration with external devices.

  8. Question: What is the power supply requirement for XR88C192CVTR-F?
    Answer: XR88C192CVTR-F typically operates on a voltage range of 3.3V to 5V, but it's important to refer to the datasheet for specific details.

  9. Question: Is XR88C192CVTR-F suitable for low-power applications?
    Answer: Yes, XR88C192CVTR-F is designed to be energy-efficient and can be used in low-power applications where power consumption is a concern.

  10. Question: Are there any development tools available for XR88C192CVTR-F?
    Answer: Yes, various development tools like integrated development environments (IDEs), compilers, and debuggers are available to aid in programming and testing XR88C192CVTR-F-based solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and documentation of XR88C192CVTR-F.