XR16C2852CJTR-F

Overview

Category: Integrated Circuit (IC)

Use: Serial Communication Controller

Characteristics: - High-performance UART (Universal Asynchronous Receiver Transmitter) with FIFO (First-In, First-Out) buffers - Supports data rates up to 3 Mbps - Low power consumption - Small form factor - RoHS compliant

Package: CJTR-F (32-pin QFN package)

Essence: The XR16C2852CJTR-F is a high-performance UART IC designed for serial communication applications. It provides reliable and efficient data transfer capabilities.

Packaging/Quantity: The XR16C2852CJTR-F is available in a 32-pin QFN package. The quantity may vary depending on the supplier.

Specifications

• Supply Voltage: 1.8V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Data Rate: Up to 3 Mbps
• Number of Channels: 2
• FIFO Depth: 128 bytes
• Interface: UART

Detailed Pin Configuration

The XR16C2852CJTR-F has a total of 32 pins. Here is the detailed pin configuration:

1. VCC
2. GND
3. TXD1
4. RXD1
5. CTS1
6. RTS1
7. DSR1
8. DCD1
9. RI1
10. INT1
11. SCLK
12. CS#
13. RESET#
14. TXD2
15. RXD2
16. CTS2
17. RTS2
18. DSR2
19. DCD2
20. RI2
21. INT2
22. GPIO0
23. GPIO1
24. GPIO2
25. GPIO3
26. GPIO4
27. GPIO5
28. GPIO6
29. GPIO7
30. GPIO8
31. GPIO9
32. GPIO10

Functional Features

• High-speed data transfer with FIFO buffers for efficient communication
• Supports multiple UART channels for simultaneous data transmission
• Programmable baud rate generator for flexible data rates
• Automatic hardware flow control (CTS/RTS) for reliable data flow
• Interrupt-driven operation for efficient CPU utilization
• Power management features for low power consumption

Advantages and Disadvantages

Advantages: - High-performance UART with fast data transfer rates - Small form factor and low power consumption - Reliable and efficient communication with FIFO buffers - Multiple UART channels for simultaneous data transmission

Disadvantages: - Limited number of GPIO pins - May require additional components for specific applications

Working Principles

The XR16C2852CJTR-F is based on the UART communication protocol. It uses a combination of hardware and software to transmit and receive serial data. The UART converts parallel data from the microcontroller into serial data for transmission and vice versa. It also handles various aspects of data transfer, such as framing, error detection, and flow control.

Detailed Application Field Plans

The XR16C2852CJTR-F can be used in various applications that require reliable serial communication. Some potential application fields include:

1. Industrial Automation: Used for communication between PLCs (Programmable Logic Controllers), sensors, and other industrial devices.
2. Embedded Systems: Enables communication between microcontrollers and peripheral devices in embedded systems.
3. Networking Equipment: Used in routers, switches, and other networking devices for serial communication interfaces.
4. Medical Devices: Facilitates communication between medical equipment and control systems.
5. Consumer Electronics: Used in devices like set-top boxes, gaming consoles, and home automation systems for serial communication.

Detailed and Complete Alternative Models

1. XR16C2850CJTR-F: Similar to XR16C2852CJTR-F but with a single UART channel.
2. XR16C2854CJTR-F: Similar to XR16C2852CJTR-F but with four UART channels.
3. XR16C2856CJTR-F: Similar to XR16C2852CJTR-F but with six UART channels.

These alternative models offer different UART channel configurations to suit specific application requirements.

Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.