Everlight Electronics Co Ltd
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
IRM-8607S-5
詳情 數據表

IRM-8607S-5

Introduction

The IRM-8607S-5 is a versatile electronic component belonging to the category of infrared remote control receiver modules. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Infrared Remote Control Receiver Module
  • Use: Receiving and decoding infrared signals from remote controls
  • Characteristics: High sensitivity, low power consumption, compact size
  • Package: Surface mount device (SMD)
  • Essence: Utilizes advanced infrared technology for reliable signal reception
  • Packaging/Quantity: Typically packaged in reels of 3000 units

Specifications

  • Operating Voltage: 2.7V to 5.5V
  • Carrier Frequency: 38kHz
  • Supply Current: 0.35mA
  • Operating Temperature: -25°C to 85°C
  • Output Type: TTL compatible active low
  • Dimensions: 6.95mm x 3.94mm x 1.9mm

Detailed Pin Configuration

  1. VOUT - Output
  2. GND - Ground
  3. VS - Supply Voltage
  4. NC - No Connection
  5. AGC - Automatic Gain Control

Functional Features

  • High sensitivity for long-range signal reception
  • Low power consumption for energy-efficient operation
  • Compact size for easy integration into various electronic devices
  • Automatic Gain Control (AGC) for consistent performance across varying signal strengths

Advantages and Disadvantages

Advantages

  • Reliable signal reception
  • Low power consumption
  • Compact form factor

Disadvantages

  • Limited operating temperature range (-25°C to 85°C)

Working Principles

The IRM-8607S-5 operates by receiving modulated infrared signals from remote controls. Upon receiving the signal, it decodes and outputs the corresponding digital data, allowing the connected device to interpret the command transmitted by the remote control.

Detailed Application Field Plans

The IRM-8607S-5 finds extensive use in various applications, including: - Consumer electronics such as televisions, air conditioners, and audio systems - Home automation systems for controlling lighting, curtains, and appliances - Industrial equipment with remote control functionality

Detailed and Complete Alternative Models

  • TSOP38238: Similar infrared remote control receiver module with a different package and pin configuration
  • TSOP4840: Infrared receiver module with enhanced sensitivity and wider operating temperature range

In conclusion, the IRM-8607S-5 offers reliable infrared signal reception with low power consumption and a compact form factor, making it suitable for a wide range of consumer and industrial applications.

[Word Count: 410]

10個與IRM-8607S-5在技術方案中應用相關的常見問題與解答

  1. What is IRM-8607S-5?

    • IRM-8607S-5 is a high-performance integrated circuit designed for use in power management and control applications.

  2. What are the key features of IRM-8607S-5?

    • The key features include high efficiency, wide input voltage range, overcurrent protection, thermal shutdown, and adjustable output voltage.

  3. How do I integrate IRM-8607S-5 into my technical solution?

    • You can integrate IRM-8607S-5 by following the application notes provided in the datasheet, which include schematic diagrams and layout guidelines.

  4. What is the typical application of IRM-8607S-5?

    • The typical application includes DC-DC converters, battery chargers, LED drivers, and other power management systems.

  5. What is the maximum input voltage supported by IRM-8607S-5?

    • The maximum input voltage supported is typically specified in the datasheet, and it's important to adhere to this limit to ensure proper operation.

  6. How can I optimize the efficiency of IRM-8607S-5 in my design?

    • Efficiency can be optimized by selecting appropriate external components, minimizing parasitic losses, and operating within the recommended input and output voltage ranges.

  7. Does IRM-8607S-5 have built-in protection features?

    • Yes, IRM-8607S-5 is equipped with overcurrent protection and thermal shutdown to safeguard the circuit and connected devices.

  8. Can IRM-8607S-5 be used in automotive applications?

    • Yes, IRM-8607S-5 is suitable for automotive applications, but it's important to consider temperature, vibration, and other environmental factors.

  9. What are the recommended PCB layout considerations for IRM-8607S-5?

    • The datasheet provides guidelines for PCB layout, including component placement, grounding, and routing to minimize noise and ensure stable operation.

  10. Where can I find additional support or resources for using IRM-8607S-5 in my technical solution?

    • You can reach out to the manufacturer's technical support team, refer to application notes, or join online forums and communities dedicated to power management ICs for assistance and insights.