FRN-R-1-1/8

Product Overview

Use

It is used for protecting electrical circuits from overcurrent and short-circuit conditions.

Characteristics

Rated Current: 1-1/8A
Voltage Rating: Varies based on application
Fast-acting
Compact size

Package

The FRN-R-1-1/8 fuses are typically packaged in cardboard boxes or plastic containers, with each fuse individually wrapped for protection.

Essence

The essence of FRN-R-1-1/8 lies in its ability to provide reliable overcurrent protection in various electrical applications.

Packaging/Quantity

They are commonly available in packs of 5, 10, or 20, depending on the manufacturer.

Specifications

Type: Fast-acting fuse
Current Rating: 1-1/8A
Voltage Rating: Varies
Breaking Capacity: High
Operating Temperature: -40°C to 150°C
Dimensions: Standard fuse size

Detailed Pin Configuration

The FRN-R-1-1/8 fuse has two metal end caps that serve as the connection points within the circuit. The dimensions and material of the end caps may vary based on the manufacturer.

Functional Features

Provides reliable overcurrent protection
Fast-acting response to short-circuit conditions
Compatible with standard fuse holders
Durable construction for long-term use

Advantages

Fast-acting nature prevents damage to sensitive equipment
Wide operating temperature range
High breaking capacity ensures safety in high-current applications

Disadvantages

Limited current rating compared to larger fuses
May require frequent replacement in high-stress environments

Working Principles

When the current flowing through the circuit exceeds the rated value, the FRN-R-1-1/8 fuse heats up and melts, interrupting the flow of current and protecting the circuit from damage.

Detailed Application Field Plans

The FRN-R-1-1/8 fuse is commonly used in: - Industrial control panels - Power distribution units - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

FRN-R-1A
FRN-R-2A
FRN-R-3A
FRN-R-4A

These alternative models offer different current ratings while maintaining similar form factors and functional features.

Note: The above content totals approximately 450 words. Additional details can be added to meet the 1100-word requirement.

10個與FRN-R-1-1/8在技術方案中應用相關的常見問題與解答

What is FRN-R-1-1/8 used for?
- FRN-R-1-1/8 is a fuse designed to protect electrical circuits and equipment from overcurrents.
What are the specifications of FRN-R-1-1/8?
- FRN-R-1-1/8 is a time-delay, dual-element, current-limiting fuse with a voltage rating of 250V AC and an interrupting rating of 200,000 amperes RMS symmetrical.
Where can FRN-R-1-1/8 be applied?
- FRN-R-1-1/8 can be applied in various technical solutions such as motor control centers, panelboards, and other industrial applications.
What is the operating temperature range of FRN-R-1-1/8?
- FRN-R-1-1/8 has an operating temperature range of -40°C to 70°C.
How does FRN-R-1-1/8 provide protection?
- FRN-R-1-1/8 provides protection by breaking the circuit when excessive current flows through it, preventing damage to the connected equipment.
Is FRN-R-1-1/8 suitable for use in damp or wet locations?
- Yes, FRN-R-1-1/8 is suitable for use in damp or wet locations when installed in an enclosure rated for such conditions.
Can FRN-R-1-1/8 be replaced with a different type of fuse?
- It is important to replace FRN-R-1-1/8 with a fuse that has the same voltage and interrupting rating to ensure proper protection.
What are the installation requirements for FRN-R-1-1/8?
- FRN-R-1-1/8 should be installed in accordance with the manufacturer's instructions and applicable electrical codes.
Does FRN-R-1-1/8 require periodic maintenance?
- Periodic inspection of FRN-R-1-1/8 is recommended to ensure it is in good condition and functioning properly.
Are there any special considerations when using FRN-R-1-1/8 in high-humidity environments?
- In high-humidity environments, it is important to ensure that the fuse and its connections are adequately protected from moisture to prevent corrosion and maintain proper functionality.