Eaton
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
BSPD200480Y1K
詳情 數據表

BSPD200480Y1K

Product Overview

  • Category: Power Management IC
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low noise, compact design
  • Package: SMD/SMT
  • Essence: Regulates voltage for electronic devices
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage: 4.5 V to 28 V
  • Output Voltage: 0.8 V to 24 V
  • Output Current: 2 A
  • Operating Temperature: -40°C to 125°C
  • Package/Case: DFN-10

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. NC (No Connection)
  6. PG (Power Good)
  7. SW (Switch)
  8. NC (No Connection)
  9. NC (No Connection)
  10. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and overtemperature protection
  • Power good indicator
  • Enable pin for power management

Advantages and Disadvantages

Advantages

  • High efficiency
  • Compact design
  • Wide operating temperature range
  • Overcurrent and overtemperature protection

Disadvantages

  • Limited output current capacity
  • Noisy output at high loads

Working Principles

The BSPD200480Y1K is a voltage regulator that maintains a stable output voltage regardless of changes in the input voltage or load. It achieves this by using feedback control to adjust the output voltage based on the comparison between the actual output voltage and a reference voltage.

Detailed Application Field Plans

The BSPD200480Y1K is suitable for various applications including: - Industrial automation - Automotive electronics - Telecommunications equipment - Portable electronic devices

Detailed and Complete Alternative Models

  • LM7805: Linear voltage regulator with fixed 5V output
  • LM317: Adjustable linear voltage regulator
  • TPS54302: Buck converter with adjustable output voltage

This comprehensive entry provides an in-depth understanding of the BSPD200480Y1K, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

10個與BSPD200480Y1K在技術方案中應用相關的常見問題與解答

  1. What is BSPD200480Y1K?

    • BSPD200480Y1K is a high-power, high-efficiency DC-DC converter module designed for use in various technical solutions.

  2. What is the input voltage range of BSPD200480Y1K?

    • The input voltage range of BSPD200480Y1K is typically 200V to 425V.

  3. What is the output voltage of BSPD200480Y1K?

    • The output voltage of BSPD200480Y1K is typically 48V.

  4. What is the maximum output current of BSPD200480Y1K?

    • The maximum output current of BSPD200480Y1K is typically 10A.

  5. What are the typical applications of BSPD200480Y1K?

    • BSPD200480Y1K is commonly used in electric vehicle power systems, renewable energy systems, and industrial power supplies.

  6. Is BSPD200480Y1K suitable for harsh environments?

    • Yes, BSPD200480Y1K is designed to operate reliably in harsh environmental conditions, making it suitable for rugged applications.

  7. Does BSPD200480Y1K have built-in protection features?

    • Yes, BSPD200480Y1K includes overcurrent protection, overvoltage protection, and thermal shutdown features to ensure safe operation.

  8. What is the efficiency of BSPD200480Y1K?

    • BSPD200480Y1K offers high efficiency, typically above 95%, ensuring minimal power loss during conversion.

  9. Can BSPD200480Y1K be used in parallel for higher power applications?

    • Yes, BSPD200480Y1K can be paralleled to achieve higher output power while maintaining overall system reliability.

  10. Are there any recommended cooling methods for BSPD200480Y1K?

    • It is recommended to use forced air or liquid cooling methods to maintain optimal operating temperatures for BSPD200480Y1K in high-power applications.