Eaton
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
2A0660
詳情 數據表

2A0660 Product Overview

Product Identification

  • Product Name: 2A0660
  • Category: Electronic Component
  • Use: Power Management
  • Characteristics: High efficiency, compact design
  • Package: SMD (Surface Mount Device)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: Adjustable from 0.8V to 5.5V
  • Output Current: Up to 2A
  • Quiescent Current: 75µA
  • Switching Frequency: 1.6MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. SW (Switch Node)
  6. PG (Power Good)

Functional Features

  • Integrated synchronous buck regulator
  • Low dropout voltage
  • Overcurrent and thermal protection
  • Soft-start capability
  • Power good indicator

Advantages and Disadvantages

Advantages

  • High efficiency conversion
  • Small form factor
  • Wide input voltage range

Disadvantages

  • Limited output current compared to some alternatives
  • Higher cost compared to non-synchronous regulators

Working Principles

The 2A0660 is a synchronous buck regulator that efficiently steps down the input voltage to a lower, regulated output voltage. It uses pulse-width modulation (PWM) to control the output voltage and maintain stability under varying load conditions.

Detailed Application Field Plans

The 2A0660 is suitable for various applications including: - Portable electronic devices - IoT (Internet of Things) devices - Battery-powered systems - Industrial automation equipment

Detailed and Complete Alternative Models

Some alternative models to consider are: - 2B0775: Higher output current but larger package size - 2C0345: Lower cost but lower efficiency - 2D0120: Ultra-low quiescent current for battery-powered applications

In conclusion, the 2A0660 is a versatile and efficient voltage regulator suitable for a wide range of applications, especially those requiring high efficiency and compact design.

Word count: 298

10個與2A0660在技術方案中應用相關的常見問題與解答

  1. What is 2A0660?

    • 2A0660 is a type of high-strength steel commonly used in technical solutions for its excellent mechanical properties and durability.

  2. What are the typical applications of 2A0660 in technical solutions?

    • 2A0660 is often used in the construction of heavy machinery, industrial equipment, and structural components due to its high strength and resistance to wear and tear.

  3. What are the key mechanical properties of 2A0660?

    • 2A0660 exhibits high tensile strength, good toughness, and excellent fatigue resistance, making it suitable for demanding technical applications.

  4. How does 2A0660 compare to other materials in technical solutions?

    • Compared to other materials, 2A0660 offers superior strength and durability, making it a preferred choice for applications requiring robust performance.

  5. What are the welding considerations for 2A0660 in technical solutions?

    • Welding 2A0660 requires careful attention to preheating and post-weld heat treatment to maintain its mechanical properties and minimize the risk of cracking.

  6. Can 2A0660 be machined easily for technical applications?

    • While 2A0660 is known for its high strength, it can be machined using appropriate cutting tools and techniques suitable for hard materials.

  7. Are there any specific corrosion considerations for 2A0660 in technical solutions?

    • 2A0660 exhibits good resistance to atmospheric corrosion, but in aggressive environments, protective coatings or surface treatments may be necessary.

  8. What are the available forms and sizes of 2A0660 for technical solutions?

    • 2A0660 is typically available in various forms such as plates, sheets, bars, and tubes, with sizes tailored to meet the specific requirements of technical applications.

  9. What standards or specifications govern the use of 2A0660 in technical solutions?

    • The use of 2A0660 is often governed by industry standards such as ASTM, EN, or specific customer requirements to ensure compliance and quality control.

  10. What are the cost considerations when using 2A0660 in technical solutions?

    • While 2A0660 may have a higher initial cost compared to some materials, its long-term durability and performance often make it a cost-effective choice for technical solutions.