圖片可能僅供參考。
有關產品詳細信息,請參閱規格。
ZXCT1082QE5TA

ZXCT1082QE5TA

Product Overview

Category

The ZXCT1082QE5TA belongs to the category of precision current sense amplifiers.

Use

It is used for accurately measuring and amplifying small differential voltages across a high-side shunt resistor in applications such as battery management, motor control, and power supplies.

Characteristics

  • High accuracy
  • Low offset voltage
  • Wide input common-mode range
  • Low quiescent current

Package

The ZXCT1082QE5TA is available in a 6-pin SOT23 package.

Essence

The essence of the ZXCT1082QE5TA lies in its ability to provide precise current sensing in various electronic systems.

Packaging/Quantity

It is typically available in reels with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 44V
  • Quiescent Current: 60µA
  • Gain Bandwidth Product: 1MHz
  • Offset Voltage: ±150µV
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The ZXCT1082QE5TA has the following pin configuration: 1. V+ (Positive Supply) 2. V- (Negative Supply) 3. IN- (Inverting Input) 4. IN+ (Non-Inverting Input) 5. OUT (Output) 6. GND (Ground)

Functional Features

  • High-side current sensing
  • Differential voltage measurement
  • Rail-to-rail output swing
  • Overcurrent detection

Advantages and Disadvantages

Advantages

  • High accuracy
  • Wide input voltage range
  • Low quiescent current
  • Small package size

Disadvantages

  • Limited output current capability
  • Sensitive to external noise

Working Principles

The ZXCT1082QE5TA operates by amplifying the small differential voltage developed across a shunt resistor when current flows through it. This amplified voltage is then used for precise current measurement and overcurrent protection.

Detailed Application Field Plans

The ZXCT1082QE5TA is well-suited for applications such as: - Battery management systems - Motor control - Power supplies - Overcurrent protection circuits

Detailed and Complete Alternative Models

Some alternative models to the ZXCT1082QE5TA include: - ZXCT1085 - ZXCT1086 - ZXCT1087 - ZXCT1088

In conclusion, the ZXCT1082QE5TA is a precision current sense amplifier with high accuracy and wide application in various electronic systems.

[Word Count: 368]

10個與ZXCT1082QE5TA在技術方案中應用相關的常見問題與解答

Sure, here are 10 common questions and answers related to the application of ZXCT1082QE5TA in technical solutions:

  1. What is the ZXCT1082QE5TA?

    • The ZXCT1082QE5TA is a high-side current sense monitor with a voltage output and an input common-mode range that includes ground.
  2. What is the typical application of ZXCT1082QE5TA?

    • The typical application of ZXCT1082QE5TA is in battery monitoring, power management, motor control, and other applications where accurate current sensing is required.
  3. What is the operating voltage range of ZXCT1082QE5TA?

    • The operating voltage range of ZXCT1082QE5TA is from 2.7V to 44V.
  4. What is the output voltage range of ZXCT1082QE5TA?

    • The output voltage range of ZXCT1082QE5TA is 0V to Vcc - 500mV.
  5. What is the accuracy of ZXCT1082QE5TA?

    • The accuracy of ZXCT1082QE5TA is typically ±1% over the full temperature range.
  6. How does ZXCT1082QE5TA help in overcurrent protection?

    • ZXCT1082QE5TA provides a voltage output proportional to the sensed current, which can be used to trigger overcurrent protection circuits.
  7. Can ZXCT1082QE5TA be used in automotive applications?

    • Yes, ZXCT1082QE5TA is suitable for automotive applications due to its wide operating voltage range and robust design.
  8. What is the thermal performance of ZXCT1082QE5TA?

    • ZXCT1082QE5TA has a low thermal impedance package, which helps in maintaining accuracy even in high-temperature environments.
  9. Is ZXCT1082QE5TA suitable for high-frequency current sensing?

    • Yes, ZXCT1082QE5TA is suitable for high-frequency current sensing due to its fast response time and wide bandwidth.
  10. Can multiple ZXCT1082QE5TA devices be used in parallel for higher current sensing?

    • Yes, multiple ZXCT1082QE5TA devices can be used in parallel to achieve higher current sensing capability while maintaining accuracy.

I hope these questions and answers provide a good overview of the application of ZXCT1082QE5TA in technical solutions. Let me know if you need further information!