Diodes Incorporated
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
PI5V330ASE
詳情 數據表

PI5V330ASE

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Level Shifter
  • Characteristics: High-speed, Low-power consumption
  • Package: SOP-16
  • Essence: Bi-directional voltage level shifter
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Input Voltage Range (A Port): 0V to VCC_A
  • Input Voltage Range (B Port): 0V to VCC_B
  • Output Voltage Range (A Port): 0V to VCC_A
  • Output Voltage Range (B Port): 0V to VCC_B
  • Maximum Data Rate: 400Mbps
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PI5V330ASE has a total of 16 pins arranged as follows:

  1. OE (Output Enable)
  2. A1 (Input/Output A1)
  3. A2 (Input/Output A2)
  4. GND (Ground)
  5. B1 (Input/Output B1)
  6. B2 (Input/Output B2)
  7. VCC_A (Supply Voltage for A Port)
  8. VCC_B (Supply Voltage for B Port)
  9. NC (No Connection)
  10. NC (No Connection)
  11. NC (No Connection)
  12. NC (No Connection)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. VCC (Supply Voltage)

Functional Features

  • Bi-directional voltage level shifting between two different voltage domains.
  • Supports high-speed data transmission up to 400Mbps.
  • Low-power consumption design for energy efficiency.
  • Output enable pin allows for easy control of the device.
  • Wide supply voltage range allows for compatibility with various systems.

Advantages and Disadvantages

Advantages: - Bi-directional voltage level shifting simplifies interfacing between different voltage domains. - High-speed data transmission capability enables efficient communication. - Low-power consumption design reduces energy usage. - Output enable pin provides flexibility in controlling the device.

Disadvantages: - Limited to a maximum data rate of 400Mbps. - Operating temperature range may not be suitable for extreme environments.

Working Principles

The PI5V330ASE is designed to shift voltage levels between two different domains, typically used in digital communication systems. It operates by monitoring the input voltage levels on both A and B ports and translating them to the corresponding output voltage levels. The bi-directional nature of the device allows for seamless communication between different voltage domains.

Detailed Application Field Plans

The PI5V330ASE can be applied in various scenarios where voltage level shifting is required. Some potential application fields include:

  1. Communication Systems: Used to interface between different voltage domains in communication protocols such as UART, SPI, I2C, etc.
  2. Microcontroller Interfacing: Enables communication between microcontrollers operating at different voltage levels.
  3. Sensor Networks: Facilitates connectivity between sensors operating at different voltage domains.
  4. Industrial Automation: Allows for integration of devices with varying voltage requirements in industrial automation systems.

Detailed and Complete Alternative Models

  1. TXS0108E: Similar bi-directional voltage level shifter with 8 channels.
  2. SN74LVC245A: Octal bus transceiver with voltage level shifting capabilities.
  3. PCA9306: Dual bidirectional I2C-bus and SMBus voltage level translator.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 345 words

10個與PI5V330ASE在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of PI5V330ASE in technical solutions:

  1. Q: What is PI5V330ASE? A: PI5V330ASE is a voltage level translator IC (integrated circuit) commonly used for bidirectional voltage translation between different logic levels.

  2. Q: What are the input and output voltage levels supported by PI5V330ASE? A: PI5V330ASE supports voltage translation between 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5V logic levels.

  3. Q: Can PI5V330ASE be used for bidirectional voltage translation? A: Yes, PI5V330ASE is designed for bidirectional voltage translation, allowing signals to be translated from one voltage level to another in both directions.

  4. Q: What is the maximum data rate supported by PI5V330ASE? A: PI5V330ASE can support data rates up to 100 Mbps, making it suitable for various high-speed communication interfaces.

  5. Q: Is PI5V330ASE compatible with I2C and SPI interfaces? A: Yes, PI5V330ASE is compatible with I2C and SPI interfaces, as it can translate the voltage levels between the microcontroller and the peripheral devices.

  6. Q: Can PI5V330ASE be used in mixed-voltage systems? A: Yes, PI5V330ASE is commonly used in mixed-voltage systems where different components operate at different voltage levels, enabling seamless communication between them.

  7. Q: Does PI5V330ASE require external power supply or voltage reference? A: No, PI5V330ASE does not require an external power supply or voltage reference, as it operates using the VCC and GND pins.

  8. Q: What is the typical power consumption of PI5V330ASE? A: The typical power consumption of PI5V330ASE is very low, making it suitable for power-sensitive applications.

  9. Q: Can PI5V330ASE handle multiple channels simultaneously? A: Yes, PI5V330ASE is available in different package options with multiple channels, allowing simultaneous voltage translation for multiple signals.

  10. Q: Are there any specific layout considerations for using PI5V330ASE? A: Yes, to ensure optimal performance, it is recommended to follow the layout guidelines provided in the datasheet, including proper decoupling and signal routing techniques.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always advisable to refer to the datasheet and consult the manufacturer for detailed information.