PI49FCT805ATSE

Overview

Category

PI49FCT805ATSE belongs to the category of integrated circuits (ICs).

Use

It is commonly used in electronic devices for signal transmission and processing.

Characteristics

• High-speed operation
• Low power consumption
• Wide operating voltage range
• Small package size

Package

PI49FCT805ATSE is available in a compact surface mount package.

Essence

The essence of PI49FCT805ATSE lies in its ability to efficiently transmit and process signals in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or trays, with varying quantities depending on customer requirements.

Specifications and Parameters

• Operating Voltage: 3.3V
• Input/Output Type: CMOS
• Number of Pins: 16
• Operating Temperature Range: -40°C to +85°C
• Maximum Clock Frequency: 200 MHz

Pin Configuration

The pin configuration of PI49FCT805ATSE is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage | | 2 | GND | Ground | | 3 | IN0 | Input 0 | | 4 | IN1 | Input 1 | | 5 | IN2 | Input 2 | | 6 | IN3 | Input 3 | | 7 | OUT0 | Output 0 | | 8 | OUT1 | Output 1 | | 9 | OUT2 | Output 2 | | 10 | OUT3 | Output 3 | | 11 | OE | Output Enable | | 12 | CLK | Clock input | | 13 | VREF | Reference voltage | | 14 | NC | No connection | | 15 | GND | Ground | | 16 | VCC | Power supply voltage |

Functional Characteristics

• High-speed signal transmission
• Low power consumption
• Output enable control
• Clock input for synchronization
• Reference voltage for accurate operation

Advantages and Disadvantages

Advantages

• High-speed operation allows for efficient signal processing.
• Low power consumption helps conserve energy.
• Wide operating voltage range provides flexibility in various applications.
• Small package size enables compact designs.

Disadvantages

• Limited number of input and output pins may restrict certain applications.
• Requires external clock source for proper operation.

Applicable Range of Products

PI49FCT805ATSE is suitable for a wide range of electronic devices that require high-speed signal transmission and processing, such as:

• Communication equipment
• Computer peripherals
• Industrial automation systems
• Consumer electronics

Working Principles

PI49FCT805ATSE operates by receiving input signals, processing them based on the provided clock signal, and producing corresponding output signals. It utilizes CMOS technology to achieve high-speed and low-power operation.

Detailed Application Field Plans

1. Communication Equipment: PI49FCT805ATSE can be used in routers and switches to handle high-speed data transmission between network interfaces.
2. Computer Peripherals: It can be employed in USB hubs or expansion cards to manage fast data transfer between multiple devices.
3. Industrial Automation Systems: PI49FCT805ATSE can be utilized in PLCs (Programmable Logic Controllers) to process sensor signals and control actuators with minimal delay.
4. Consumer Electronics: It can be integrated into gaming consoles or set-top boxes to facilitate rapid data exchange between different components.

Detailed Alternative Models

Some alternative models to PI49FCT805ATSE include:

• PI49FCT3805ATSE
• PI49FCT4805ATSE
• PI49FCT5805ATSE

These models offer similar functionality and can be used as substitutes depending on specific requirements.

5 Common Technical Questions and Answers

1. Q: What is the maximum clock frequency supported by PI49FCT805ATSE? A: The maximum clock frequency is 200 MHz.

2. Q: Can PI49FCT805ATSE operate with a different supply voltage? A: No, it requires a 3.3V power supply for proper operation.

3. Q: How many input and output pins does PI49FCT805ATSE have? A: It has 4 input pins and 4 output pins.

4. Q: Is PI49FCT805ATSE compatible with TTL logic levels? A: No, it operates with CMOS logic levels.

5. Q: What is the operating temperature range of PI49FCT805ATSE? A: It can operate within a temperature range of -40°C