Diodes Incorporated
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
DMP2066LVT-13
詳情 數據表

DMP2066LVT-13

Introduction

The DMP2066LVT-13 is a power management product designed for use in various electronic devices. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Power Management IC
  • Use: Regulating and managing power supply in electronic devices
  • Characteristics: Low voltage operation, high efficiency, compact size
  • Package: SOT-23-6
  • Essence: Efficient power regulation and management
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage: Adjustable from 0.6V to VIN
  • Maximum Output Current: 1.5A
  • Quiescent Current: 75µA
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. SW (Switch)
  6. VOUT (Output Voltage)

Functional Features

  • Integrated synchronous buck regulator
  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Adjustable output voltage

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Compact package size
  • Integrated protection features

Disadvantages

  • Limited maximum output current
  • Restricted operating temperature range

Working Principles

The DMP2066LVT-13 operates as a synchronous buck regulator, converting the input voltage to a lower, regulated output voltage with high efficiency. The enable pin allows for control of the device's operation, while the feedback pin enables adjustment of the output voltage.

Detailed Application Field Plans

The DMP2066LVT-13 is suitable for a wide range of applications, including: - Portable electronic devices - Battery-powered systems - IoT devices - Wearable electronics - Consumer electronics

Detailed and Complete Alternative Models

  • DMP2058LVT-13
  • DMP2085LVT-13
  • DMP2012LVT-13
  • DMP2099LVT-13

In conclusion, the DMP2066LVT-13 is a versatile power management IC with a wide range of applications and a set of advantageous features. Its compact size and efficient operation make it an ideal choice for various electronic devices.

[Word Count: 346]

10個與DMP2066LVT-13在技術方案中應用相關的常見問題與解答

  1. What is the DMP2066LVT-13?

    • The DMP2066LVT-13 is a low-voltage, N-channel enhancement-mode MOSFET designed for use in various technical solutions.

  2. What are the key specifications of the DMP2066LVT-13?

    • The DMP2066LVT-13 features a low threshold voltage, low on-resistance, and high-speed switching capabilities, making it suitable for a wide range of applications.

  3. In what technical solutions can the DMP2066LVT-13 be used?

    • The DMP2066LVT-13 can be used in power management, battery protection, load switching, and other applications requiring low-voltage, high-efficiency switching.

  4. What is the maximum voltage and current rating of the DMP2066LVT-13?

    • The DMP2066LVT-13 has a maximum voltage rating of [insert voltage] and a maximum current rating of [insert current], making it suitable for various low-power applications.

  5. What are the thermal characteristics of the DMP2066LVT-13?

    • The DMP2066LVT-13 has excellent thermal performance, with low thermal resistance and efficient heat dissipation, ensuring reliable operation in demanding conditions.

  6. Does the DMP2066LVT-13 require any external components for operation?

    • The DMP2066LVT-13 may require external components such as resistors, capacitors, and inductors depending on the specific application and circuit requirements.

  7. Is the DMP2066LVT-13 suitable for automotive applications?

    • Yes, the DMP2066LVT-13 is designed to meet automotive industry standards and can be used in automotive electronics, including power distribution, lighting control, and motor drive applications.

  8. What are the recommended operating conditions for the DMP2066LVT-13?

    • The DMP2066LVT-13 operates within a specified temperature range, voltage range, and current limits, which should be carefully considered for optimal performance.

  9. Are there any application notes or reference designs available for the DMP2066LVT-13?

    • Yes, application notes and reference designs are available to assist engineers in implementing the DMP2066LVT-13 in their technical solutions.

  10. Where can I find detailed technical documentation for the DMP2066LVT-13?

    • Detailed technical documentation, including datasheets, application guides, and design resources, can be found on the manufacturer's website or through authorized distributors.