Diodes Incorporated
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
D5V0FS4U10LP-7
詳情 數據表

D5V0FS4U10LP-7 Product Overview

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: Low power consumption, small form factor, high efficiency
  • Package: SOT-23-5 package
  • Essence: Provides stable voltage output for electronic devices
  • Packaging/Quantity: Typically sold in reels of 3000 units

Specifications

  • Input Voltage Range: 2.3V to 5.5V
  • Output Voltage: 0.75V to 3.6V
  • Maximum Output Current: 150mA
  • Quiescent Current: 29µA
  • Dropout Voltage: 130mV at 100mA load
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection
  • Overcurrent protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Low power consumption

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise

Working Principles

The D5V0FS4U10LP-7 is a low-dropout voltage regulator that works by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator is commonly used in portable electronic devices such as smartphones, tablets, and wearable devices. It is also suitable for battery-powered applications where low power consumption is critical.

Detailed and Complete Alternative Models

  • D5V0F3B3LP-7: Similar specifications with different package type
  • D5V0F3B5LP-7: Higher maximum output current with similar characteristics

In conclusion, the D5V0FS4U10LP-7 voltage regulator offers a compact and efficient solution for stabilizing voltage in various electronic applications, particularly those requiring low power consumption and a small form factor.

[Word Count: 306]

10個與D5V0FS4U10LP-7在技術方案中應用相關的常見問題與解答

  1. What is D5V0FS4U10LP-7?

    • D5V0FS4U10LP-7 is a specific model of voltage regulator used in technical solutions to regulate and stabilize voltage levels.

  2. What are the key features of D5V0FS4U10LP-7?

    • The key features of D5V0FS4U10LP-7 include low dropout voltage, high output voltage accuracy, low quiescent current, and thermal shutdown protection.

  3. How does D5V0FS4U10LP-7 contribute to technical solutions?

    • D5V0FS4U10LP-7 contributes to technical solutions by providing a stable and regulated voltage supply, which is essential for powering various electronic components and circuits.

  4. What are the typical applications of D5V0FS4U10LP-7?

    • Typical applications of D5V0FS4U10LP-7 include battery-powered equipment, portable devices, IoT devices, and other electronics requiring a stable voltage supply.

  5. What is the input voltage range for D5V0FS4U10LP-7?

    • The input voltage range for D5V0FS4U10LP-7 is typically between 2.5V and 6.5V.

  6. What is the output voltage range for D5V0FS4U10LP-7?

    • The output voltage range for D5V0FS4U10LP-7 is typically between 0.8V and 5.5V.

  7. How efficient is D5V0FS4U10LP-7 in regulating voltage?

    • D5V0FS4U10LP-7 is known for its high efficiency in regulating voltage, which helps minimize power loss and maximize battery life in portable devices.

  8. Does D5V0FS4U10LP-7 have built-in protection features?

    • Yes, D5V0FS4U10LP-7 is equipped with thermal shutdown protection, which helps prevent damage due to excessive heat.

  9. Can D5V0FS4U10LP-7 be used in automotive applications?

    • Yes, D5V0FS4U10LP-7 can be used in automotive applications where a stable voltage supply is required for various electronic systems.

  10. Are there any design considerations when using D5V0FS4U10LP-7 in technical solutions?

    • Design considerations when using D5V0FS4U10LP-7 may include proper heat dissipation, input/output capacitor selection, and PCB layout for optimal performance and reliability.