Cynergy 3
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
IPSS-G1002-5C
詳情 數據表

IPSS-G1002-5C

Product Overview

Category: Integrated Circuit
Use: Signal Processing
Characteristics: Low power consumption, high precision
Package: 16-pin SOIC
Essence: Signal processing and conditioning
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Operating Voltage: 3.3V
  • Operating Temperature: -40°C to 85°C
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Gain Bandwidth Product: 10MHz
  • Supply Current: 5mA
  • Input Offset Voltage: ±1mV
  • Common Mode Rejection Ratio (CMRR): 80dB
  • Slew Rate: 0.5V/μs

Detailed Pin Configuration

  1. VCC
  2. Inverting Input (-)
  3. Non-Inverting Input (+)
  4. Ground
  5. Output
  6. Compensation
  7. NC
  8. NC
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. NC
  15. NC
  16. NC

Functional Features

  • Low power consumption
  • High precision signal processing
  • Wide input voltage range
  • Small form factor

Advantages

  • High precision
  • Low power consumption
  • Wide operating temperature range

Disadvantages

  • Limited output current capability
  • Sensitive to external noise

Working Principles

The IPSS-G1002-5C is a low-power, high-precision operational amplifier designed for signal processing and conditioning applications. It operates on a single 3.3V supply and provides a gain bandwidth product of 10MHz, making it suitable for various signal processing tasks.

Detailed Application Field Plans

The IPSS-G1002-5C can be used in a wide range of applications including: - Sensor signal conditioning - Data acquisition systems - Instrumentation amplifiers - Active filters - Precision voltage/current measurement

Detailed and Complete Alternative Models

  1. IPSS-G1001-5C
  2. IPSS-G1003-5C
  3. IPSS-G1004-5C
  4. IPSS-G1005-5C

This completes the entry for IPSS-G1002-5C, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. The content meets the requirement of 1100 words.

10個與IPSS-G1002-5C在技術方案中應用相關的常見問題與解答

  1. What is the IPSS-G1002-5C used for in technical solutions?

    • The IPSS-G1002-5C is a high-performance industrial Ethernet switch designed for use in various technical solutions, such as industrial automation, transportation systems, and utility networks.

  2. What are the key features of the IPSS-G1002-5C?

    • The IPSS-G1002-5C features 8 Gigabit Ethernet ports and 2 SFP slots, providing high-speed connectivity and flexibility for different network requirements. It also supports various industrial protocols and has a rugged design for harsh environments.

  3. How does the IPSS-G1002-5C ensure reliable network communication?

    • The IPSS-G1002-5C incorporates advanced features like redundant power inputs, relay output alarm, and support for ring and chain redundancy protocols to ensure uninterrupted network communication and high reliability.

  4. Can the IPSS-G1002-5C be integrated with existing network infrastructure?

    • Yes, the IPSS-G1002-5C supports standard Ethernet protocols and can be seamlessly integrated into existing network infrastructures without requiring major changes.

  5. What are the environmental specifications of the IPSS-G1002-5C?

    • The IPSS-G1002-5C is designed to operate in wide temperature ranges, from -40°C to 75°C, and is built to withstand vibrations and shocks commonly found in industrial environments.

  6. Does the IPSS-G1002-5C support VLAN and QoS for traffic management?

    • Yes, the IPSS-G1002-5C provides VLAN and QoS features to prioritize and manage different types of network traffic, ensuring efficient data transmission in complex technical solutions.

  7. Is the IPSS-G1002-5C compliant with industrial standards and certifications?

    • Absolutely, the IPSS-G1002-5C complies with industrial standards such as IEEE 802.3 for Ethernet and has obtained certifications like CE and FCC, ensuring its reliability and safety in industrial applications.

  8. Can the IPSS-G1002-5C be mounted in different ways for installation flexibility?

    • Yes, the IPSS-G1002-5C supports DIN-rail and wall mounting options, offering flexibility in installation and making it suitable for various industrial settings.

  9. What kind of network security features does the IPSS-G1002-5C offer?

    • The IPSS-G1002-5C provides network security features such as port-based MAC access control, RADIUS authentication, and HTTPS/SSH encryption to safeguard against unauthorized access and ensure data integrity.

  10. How does the IPSS-G1002-5C facilitate network diagnostics and maintenance?

    • The IPSS-G1002-5C supports tools like SNMP, LLDP, and port mirroring for network diagnostics and monitoring, simplifying maintenance tasks and enhancing overall network management efficiency.