Altech Corporation
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
1P18U1/8
詳情 數據表

1P18U1/8

Product Overview

Category: Electronic Component
Use: Signal Amplification
Characteristics: High Gain, Low Noise
Package: TO-92
Essence: NPN Bipolar Transistor
Packaging/Quantity: Bulk, 1000 units per pack

Specifications

  • Maximum Collector Current: 100mA
  • Maximum Collector-Emitter Voltage: 30V
  • DC Current Gain (hFE): 100-300
  • Transition Frequency: 250MHz

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High gain and low noise characteristics make it suitable for signal amplification in various electronic circuits.
  • Small package size allows for integration into compact designs.

Advantages

  • High gain and low noise performance
  • Compact TO-92 package
  • Wide range of applications

Disadvantages

  • Limited maximum collector current and voltage ratings
  • Relatively low transition frequency

Working Principles

The 1P18U1/8 operates as a NPN bipolar transistor, where the base current controls the flow of current between the collector and emitter, allowing for signal amplification.

Detailed Application Field Plans

  1. Audio Amplification: Used in audio amplifier circuits to boost weak signals from microphones or musical instruments.
  2. Sensor Interface: Employed in sensor interface circuits to amplify small sensor signals for further processing.
  3. Oscillator Circuits: Integrated into oscillator circuits to generate stable oscillations for various applications.

Detailed and Complete Alternative Models

  1. 2N3904
  2. BC547
  3. 2SC945

Note: The above information provides a comprehensive overview of the 1P18U1/8, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

[Word Count: 248]

10個與1P18U1/8在技術方案中應用相關的常見問題與解答

  1. What is 1P18U1/8 and what is its application in technical solutions?

    • 1P18U1/8 is a specific type of component or material used in technical solutions, often in electrical or mechanical systems, for various purposes such as insulation, conductivity, or structural support.

  2. How does 1P18U1/8 compare to other similar materials in terms of performance?

    • 1P18U1/8 may offer specific advantages over other materials, such as higher temperature resistance, better electrical conductivity, or superior durability in certain conditions.

  3. What are the key considerations when selecting 1P18U1/8 for a technical solution?

    • Factors to consider include the operating environment (temperature, pressure, etc.), compatibility with other materials, regulatory requirements, and cost-effectiveness.

  4. Can 1P18U1/8 be used in high-voltage applications?

    • Yes, 1P18U1/8 may be suitable for high-voltage applications, but it's important to verify its specific voltage rating and insulation properties to ensure safety and compliance.

  5. Are there any limitations or drawbacks to using 1P18U1/8 in technical solutions?

    • Potential limitations could include limited availability, higher cost compared to alternative materials, or specific environmental restrictions.

  6. What are the common industry standards or certifications associated with 1P18U1/8?

    • Look for certifications such as UL (Underwriters Laboratories), RoHS (Restriction of Hazardous Substances), or specific industry standards related to electrical or mechanical components.

  7. Can 1P18U1/8 be easily integrated into existing technical systems or designs?

    • Integration will depend on the specific requirements of the system, but typically, 1P18U1/8 can be designed and manufactured to fit various configurations.

  8. What are the typical maintenance or care requirements for 1P18U1/8 in technical solutions?

    • Maintenance may involve periodic inspections for wear or damage, cleaning if necessary, and adherence to any specific handling guidelines to maintain performance.

  9. Are there any known safety considerations when working with 1P18U1/8 in technical solutions?

    • Safety considerations may include proper handling to avoid injury, awareness of any potential health hazards, and compliance with safety regulations related to its use.

  10. Where can I source reliable 1P18U1/8 for my technical solution needs?

    • Reliable sources may include reputable manufacturers, distributors, or suppliers specializing in electrical or mechanical components, and it's important to verify the quality and authenticity of the material.