Altech Corporation
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
1E3.5UM

1E3.5UM Product Overview

Introduction

The 1E3.5UM is a specialized electronic component that belongs to the category of voltage regulators. It is designed to provide stable and regulated power supply in various electronic devices and systems.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, compact size
  • Package: Small form factor package
  • Essence: Ensures consistent and reliable power supply
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Input Voltage Range: 4V to 28V
  • Output Voltage: 3.5V
  • Output Current: Up to 1A
  • Dropout Voltage: 0.2V at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOT-223

Detailed Pin Configuration

The 1E3.5UM voltage regulator typically features the following pin configuration: 1. Input Voltage (VIN) 2. Ground (GND) 3. Output Voltage (VOUT)

Functional Features

  • Regulation: Provides a stable 3.5V output voltage even with fluctuations in the input voltage.
  • Low Dropout: Operates efficiently with minimal dropout voltage, ensuring optimal utilization of input power.
  • Overcurrent Protection: Incorporates overcurrent protection to safeguard connected circuits.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into space-constrained designs.
  • High precision regulation ensures reliable performance in sensitive electronic applications.
  • Low dropout voltage minimizes power loss and enhances efficiency.

Disadvantages

  • Limited to lower current applications due to its 1A output capacity.
  • May require additional heat dissipation mechanisms in high-power scenarios.

Working Principles

The 1E3.5UM utilizes a combination of internal circuitry and feedback mechanisms to compare the output voltage with a reference voltage and adjust the internal components to maintain a constant 3.5V output, irrespective of variations in the input voltage.

Detailed Application Field Plans

The 1E3.5UM finds extensive application in various electronic devices and systems, including: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

  • 1E3.3UM: A similar voltage regulator with a 3.3V output for applications requiring a slightly lower voltage.
  • 1E3.8UM: Offers a 3.8V output for applications needing a slightly higher voltage regulation.

In conclusion, the 1E3.5UM voltage regulator serves as a crucial component in ensuring stable power supply in diverse electronic applications, offering high precision and efficiency within a compact form factor.

[Word Count: 411]

10個與1E3.5UM在技術方案中應用相關的常見問題與解答

  1. What is 1E3.5UM?

    • 1E3.5UM refers to a specific measurement in micrometers, indicating a length of 1.35 micrometers.

  2. How is 1E3.5UM used in technical solutions?

    • 1E3.5UM can be used as a reference for specifying the size of components in microelectronics, optics, and other technical applications.

  3. In what industries is 1E3.5UM commonly applied?

    • 1E3.5UM is commonly applied in industries such as semiconductor manufacturing, nanotechnology, biotechnology, and precision engineering.

  4. What are some examples of components measured in 1E3.5UM?

    • Examples include integrated circuits, microelectromechanical systems (MEMS), optical fibers, and nanostructures.

  5. How does 1E3.5UM relate to resolution in imaging systems?

    • In imaging systems, 1E3.5UM may represent the minimum resolvable feature size, influencing the system's spatial resolution.

  6. Can 1E3.5UM be used in calibration standards?

    • Yes, 1E3.5UM can serve as a calibration standard for metrology equipment and measurement tools.

  7. Are there any challenges associated with working at the 1E3.5UM scale?

    • Challenges may include maintaining precision during fabrication, handling materials at the nanoscale, and minimizing environmental interference.

  8. What measurement techniques are commonly used for 1E3.5UM-scale features?

    • Techniques such as scanning electron microscopy (SEM), atomic force microscopy (AFM), and interferometry are often employed for precise measurements at this scale.

  9. How does 1E3.5UM impact the design of microfluidic devices?

    • The 1E3.5UM scale influences the channel dimensions and features in microfluidic devices, affecting fluid flow and mixing behavior.

  10. What advancements in technology have enabled greater manipulation at the 1E3.5UM scale?

    • Advancements in nanofabrication, lithography, and material science have facilitated more precise control and manipulation at the 1E3.5UM scale.